* Products that meet your criteria are shown in table below.
- Noise Level (dB(A))
- Recommended Hose Diameter (mm)
- Hose Mouthpiece Mounting Screw
- Length from Shaft to Side (mm)
- About 17.0
- Collet Chuck Dimensions (mm)
- Air Consumption (m3/min)
- About 0.4 (air pressure 0.6MPa at the time of no load)
- No Load Rotation Speed (min-1[r.p.m])
- 25000 (highest)
- Weight (ｋg)
- About 0.56 (with no whetstone)
- Overall Length (mm)
- About 174 (with no whetstone)
- TRUSCO Part Number
- Collet chuck: Zipper CP for 6-mm shaft (with chuck nut)
Customers Who Viewed This Item Also Viewed
| 5 star
| 4 star
| 3 star
| 2 star
| 1 star
1 Customer Reviews
The reviews are automatic translation.
Removal of oxide film after laser processing, chamfering and cutting of welded parts.
On 2013-09-05 18:07:00
The feeling of use is very good. Cutting power is available, cutting speed can be changed freely, and the feeling grasping firmly fits the hand. If you dare give out hope, in times of high humidity, water drops will be attached near the exit of the air so it would be nice to let the water drops come out. By the way, this time it is the second time for purchase, the last thing was able to use for 15 years. I purchased it this time it was broken, but I will put out the broken item for repair.