|Skill touch - offset type - stone material - for glass
Skill touch - offset type - stone material - for glass
- Outer Diameter (phi mm)
- Maximum Peripheral Velocity (m/min)
- Maximum Rotation Speed (min-1[r. p.m])
- Hole Diameter (phi mm)
- Abrasive Material
* Products that meet your criteria are shown in table below.
Customers Who Viewed This Item Also Viewed
| 5 star
| 4 star
| 3 star
| 2 star
| 1 star
6 Customer Reviews
The reviews are automatic translation.
On 2016-04-14 20:09:21
I think that it is used for finish cutting of tile joints, but it is still unused. I do not get a feeling.
Repair of side mirror of motorcycle
On 2014-11-04 21:40:35
I used to cut out the convex mirror to just the right size. It was difficult because glass was put on it unless it was scraped carefully, but it worked well. The price is also cheap and it seems to last a long time as much as cutting thin glass. I bought rough things of the same number at the same time but it was not suitable for sharpening thin glass.
I am using it to make the quartz shape.
On 2014-05-12 18:59:07
It is useful for determining the shape.
Finish the pottery
On 2013-12-23 17:42:35
I made pottery but used to scrape off the soil and to fix the glaze dripping. It reduces crack cracking time and does not feel stress.
Polishing of ceramics etc
On 2010-07-01 22:22:41
On 2010-01-20 18:36:34
I purchased a transparent glass plate (t3) to shave it about 1 mm. (Shaved length is about 80 mm) (It is difficult to cut 1 mm with a glass cutter.) Although there was no major collapse, it could not be cleaned beautifully. It seems that the side part is wavy, the cutting trace is biased to a part, probably because of that. If you want to cut the glass cleanly, it seems that a grinding wheel dedicated to glass is good.
Customers Who Bought This Item Also Bought