Buy more than* S$200* and get FREE SHIPPING

Hard drill (for breakage tap removal)

3.40 (10)
...see all
Product Options
ADD TO CART
Material TRUSCO Part Number Shank Precision Set Contents (mm) 2014 TRUSCO Published Page Groove Length FL (mm) Shank Diameter d (phi mm) Blade Diameter D (phi mm) Pricision Overall Length L (mm) Point Angle (Degree) Package
Qty.
Ship pack of Mfr.# Item.# Sales Price Availability Qty.
Material TRUSCO Part Number Shank Precision Set Contents (mm) 2014 TRUSCO Published Page Groove Length FL (mm) Shank Diameter d (phi mm) Blade Diameter D (phi mm) Pricision Overall Length L (mm) Point Angle (Degree) Package
Qty.
Ship pack of Mfr.# Item.# Sales Price Availability Qty.
Cemented carbide (CARBIDE) - h7 phi2,phi3,phi4,phi5,phi6 - - - - - - - 1Pack(5PC) 1 EX-H-DRL 2-6Set(5E) 09134167 269.90 SGD
Shipped after 2017-06-29
Cemented carbide (CARBIDE) 630-4656 - - 1-0425 50 10 10 h7 100 118 1PC 1 EX-H-DRL 10 08117006 229.90 SGD
Shipped after 2017-06-30
Cemented carbide (CARBIDE) 630-4664 - - 1-0425 55 12 11 h7 110 118 1PC 1 EX-H-DRL 11 08117015 269.90 SGD
Shipped after 2017-06-27
Cemented carbide (CARBIDE) 630-4672 - - 1-0425 60 12 12 h7 110 118 1PC 1 EX-H-DRL 12 08117024 279.90 SGD
Shipped after 2017-06-27
Cemented carbide (CARBIDE) 630-4737 - - 1-0425 35 8 7 h7 80 118 1PC 1 EX-H-DRL 7 08116972 129.90 SGD
Shipped after 2017-06-29
Cemented carbide (CARBIDE) 630-4745 - - 1-0425 40 8 8 h7 80 118 1PC 1 EX-H-DRL 8 08116981 139.90 SGD
Shipped after 2017-06-30
Cemented carbide (CARBIDE) 630-4753 - - 1-0425 45 10 9 h7 100 118 1PC 1 EX-H-DRL 9 08116997 209.90 SGD
Shipped after 2017-06-27
Carbide 630-4681 - - - 10 2 2 h7 30 118 1PC 1 EX-H-DRL 2 08116927 38.74 SGD
Shipped after 2017-06-26
Carbide 630-4699 - - - 15 3 3 h7 40 118 1PC 1 EX-H-DRL 3 08116936 45.74 SGD
Shipped after 2017-06-26
Carbide alloy (CARBIDE) 630-4702 - - - 20 4 4 h7 45 118 1PC 1 EX-H-DRL 4 08116945 50.90 SGD
Shipped after 2017-06-26
Carbide alloy (CARBIDE) 630-4711 - - - 25 5 5 h7 50 118 1PC 1 EX-H-DRL 5 08116954 60.76 SGD
Shipped after 2017-06-26
Carbide alloy (CARBIDE) 630-4729 - - - 30 6 6 h7 60 118 1PC 1 EX-H-DRL 6 08116963 76.31 SGD
Shipped after 2017-06-26
ADD TO CART
Customer Reviews
5 star 4
4 star 2
3 star 1
2 star 0
1 star 3
Review Rating: 3.40
10 Customer Reviews
The reviews are automatic translation.
Tap removal
3
From Japan
On 2016-08-04 10:16:59
It can not be scraped as much as I thought, and it is useless if I use it once.
This review is about item#08116963.
Removing a broken 4M tap
1
From Japan
On 2016-06-15 19:51:11
I set it in the milling machine and it broke at about 5 mm from the tip after 2 minutes of work start. Depending on the conditions, you may be able to punch well, but it seems to be an unreasonable task for amateurs. It took almost half a day to recover from this frustration.
This review is about item#08116927.
Using a battery type electric drill
1
From Japan
On 2016-04-27 14:49:06
Although it is certainly being scraped, its speed is very slow and it is 3 hours and it is about 6 mm. The drill broke out of the middle of that. Perhaps it was bad, but I was not convinced.
This review is about item#08116927.
Drilling hard shaft
5
From Japan
On 2015-10-29 15:59:54
It is impossible with a drill 3 mm hole drilled in a carbon steel shaft. It was accompanied by trial and error to use by an amateur, and I got missing a tooth near the penetration. . Will it be cured by polishing ?, In the electric hand drill there is a risk of tooth chipping, but it is a point to push it slowly over time.
This review is about item#08116927.
Elimination of damaged taps
5
From Japan
On 2014-10-31 09:03:52
OS6 made M6 tap accidentally folded Can the hole be drilled with the same manufacturer's hard drill? Moreover, the tap is broken in a state of being stuck near 20 mm. Honest talk, I was not expecting ... With the fine feed of milling, I started awesome feeding. With dry cutting, I opened a 20 mm deep through hole in the M6 ​​tap! Moreover, the screw thread was pulled out intact! Just like "Shogun and shield" wins! Great drill! OSG is not Date ♪
This review is about item#08116945.
Elimination of damaged taps
5
From Japan
On 2014-08-24 16:30:36
I ought to have bought this product from the beginning, as many as a waste of the drill's blade wasted.
This review is about item#08116927.
Removing broken taps
5
From Japan
On 2014-05-12 16:32:08
It took quite a while to cut, but I was able to successfully remove taps.
This review is about item#08116927.
Drilling of superhard board
4
From Japan
On 2014-03-24 14:09:04
Sharpness is good. However, if the total length is 50 mm it is the highest. If other manufacturer's items have a total length of 50 mm or more, please introduce.
This review is about item#08116936.
Breakage tap removal
4
From Japan
On 2013-06-27 17:08:45
I broke the tap and got lost as a carbide drill to remove it, but I worked with a drilling machine purchased here at Mochi Rice cake shop, so I removed a core a bit but managed to remove somehow Although it is nice, I think I will use a milling machine at a moment
This review is about item#08116963.
MonotaRO TIN-I-SFT M6 x 1 Tin coat spiral tap As breakage tap removal
1
From Japan
On 2012-05-18 00:43:05
We confirmed the cutting conditions with OSG HP, but we did not know, so temporarily spindle rotation number 1,800 rpm, dry cutting was done. First of all, after breaking the tap part with a diamond rotating grinding stone, making it almost flat, cutting the hard drill to reduce the hard drill and cutting it into a breakable tap part, it can not cut totally. Hardness difference with spiral tap was hardly felt. After all, we abandoned the removal of tears on the way. ⇒ I would be pleased if you can ask the working maker of the milling machine whether there is an error in the method of use.
This review is about item#08116945.

Related Products