|Auto welding shading surface Solar-type (with photosensitive and time adjustment)
Auto welding shading surface Solar-type (with photosensitive and time adjustment)
* Products that meet your criteria are shown in table below.
- When using welding mask, please do not interrupt arc light.As much as possible, the photo detector of the welding surface make sure to receive arc light directly and sufficiently, please. To keep the sensitive degree of the changes, keep protective pla, When using welding mask, please do not interrupt arc light.As much as possible, the photo detector of the welding surface make sure to receive arc light directly and sufficiently, please. To keep the sensitive degree of the changes, keep protective pla
- Welding, cutting, spray, and gouging etc, Welding, cutting, spray, and gouging etc
- Period of Service (years)
- Inner/Outer Protection Plate
- Resistant to dust
- Infrared Ultraviolet Protection
- Adaptation to DIN13
- Non-light Shielding
- Switching Time (sec)
- (To light block0.0001, (To light unblock)0.1-0.9
- Line of sight range (mm)
- Degree of Shading
- #9 - #13
- Filter Size (mm)
- Solar Battery (Lithium Battery x2)
- Operating Temperature Range (deg C)
- -10 - 65
- Weight (g)
- Since lithium batteries are the cause of auxiliary power supply , it is used even in dark places
Customers Who Viewed This Item Also Viewed
Star Electric Manufacturing
| 5 star
| 4 star
| 3 star
| 2 star
| 1 star
34 Customer Reviews
The reviews are automatic translation.
On 2016-12-06 15:40:09
A variety of manufacturers and it was also used considerable expensive ones, rotating portion of the liquid crystal short life of the helmet, it was weak. This we have been firm.
Welding such as pipe organ during fabrication parts and jigs
On 2016-11-30 08:14:33
Do you choose the name-brand products? Stray but ...
Satisfaction and things to buy.
On 2016-11-09 14:33:40
The required functionality is provided with sufficient lowest, nothing dissatisfaction except finishing details.
On 2016-10-27 16:35:18
Good welding and reactions other than TIG in space and outdoor rash also in the adjustment and fit-mask wearing a good place ... belt
(Although compatibility with the mercury lamp has been written in the fine print, or to say that can not be used in the factory?) Before is very dark at hand is hard to see that ... the balance bad place to heavy-light shielding bad, even after the light-shielding After all dark most thin and hard to see the fine hand also ... result, we no longer use, and then buy in consultation with Koguya as until now.
On 2016-05-27 16:52:28
On 2016-05-24 09:52:54
This function and price satisfaction.
On 2016-05-18 14:49:27
Price is cheap.
Use at work
On 2016-04-21 18:59:10
This is the two eyes. Ease of use and cost is satisfied.
Because one day is with about four years, I hope that with the same place also this time.
On 2015-11-03 09:01:57
It was dubious try using a super-convenient! . I hope both hands to be able to use the
On 2015-10-15 21:25:12
Attached is very good because there is a fine adjustment. I think that may be the adjustment of the delay and depth. Working at the time color is too dark no longer know what is welding where not only see the arc light. We're using an ordinary welding surface that has been used until now to stop using so. I think I may a little more thin adjustment can be.
Customers Who Bought This Item Also Bought
Star Electric Manufacturing