The reviews are automatic translation.
On 2017-03-23 15:01:26
I use without problems. Give the electric screwdriver has come in handy, such as a little boring.
Drilling of plastic
On 2017-02-17 22:20:53
Because the holes in the usual set of not in the drill size is drilled has come in handy. It is a lot cheaper than the nearby hardware store.
Drilling work on the copper pipe and aluminum plate
On 2016-11-04 11:55:57
Step drill to start from 3mm diameter I may if to Monotarou brand, but was determined because it was not in this size. Without necessarily sharp sharpness also especially not good with food, it is just a normal drill.
Time shortening replacement of small drill
On 2016-11-01 17:06:46
Is good. It was used in iron and steel for the (2mm thick). Since sharpness is too good, you must be careful.
Pula & drilling of aluminum panels
On 2016-08-03 15:44:21
Not be only a drilled hole of up to 6.5mm in the hand of the drill, it had been extended with Ryuta, simple to large hole now be opened using this. It is very convenient.
On 2016-07-29 17:37:30
It could be used without problems.
Durability in long-term use is unknown.
Alternative for the conventional use of corruption
On 2016-06-17 12:32:07
During the hole expansion, without the need convenience of convenient use of tooth replacement
Car body KaSoji
On 2016-06-15 18:20:18
Is early the sharpness becomes worse. A little more strength you want because there is abrasive down no blade.
Drilling and expansion of the plastic cover
On 2016-03-24 17:43:42
We were able to expand to the size of the left think with a light force.
Only drilling far plastic, but it is very convenient.
On 2015-12-30 14:25:20
It was purchased for a hole in the iron plate on a business trip site.
This if it is even without a lot of drill and Holsoe handy because in stages can to widen the hole.