The reviews are automatic translation.
On 2016-12-14 11:37:53
Given well, and comes with a simple type soldering iron set, we use it. Here is a stability preeminent since become large.
A little more, cheap and glad you but ...
Required when solder used
On 2016-10-06 16:11:33
COSPA is high have also attached a sponge so had been shipped with the soldering iron is was something that cheap.
Production of printed circuit board
On 2016-09-15 08:40:07
There is discontent in every time you use. Subject to feel as commercialized not know the intended use of at product development. Stability is poor. Moving each time to clean the tip. Tips to ease, these are expected to stop using to buy the good as soon as possible there is a safe very concern.
Solder work of the printed circuit board
On 2016-09-11 14:32:04
Turin Handa sponge functions hesitation.
In general, the volume with the addition of water to function as increased and solder taking.
But the problem try using came out, because the water leak is easy and shallow grooves add water need to be careful.
Sponge in removing the solder it is necessary to take the solder at this time at the center. When it comes to the end, or a soldering iron destination and has been cleaning while Suberashi in the sponge go scattered around protruding solder ball from the sponge.
I think that is not suitable for people to increase the solder work.
In general, although there is no problem because there is a guard to the top of the sponge bulging, you must be careful because too shallow.
On 2016-08-25 22:24:16
Usability good, is also satisfied with the price basis.
Soldering iron stand
On 2016-05-05 17:28:22
Amount is commensurate
Soldering iron stand
On 2016-02-16 20:42:51
Table in contact with rubber feet without any metal and tables directly in place in contact with the table will be scratched.
Also do not have things much different from that sold in shallow because the 100 yen shop without departing the place to put the water in a sponge.
It is the cradle of the soldering iron.
On 2016-02-13 15:02:16
If you are firm but inexpensive, it is enough practical. Easy to handle and lightly to the entire, there is a sense of stability when even lightly put the soldering iron.
It is also a very good hardness and mesh sponge. The depression of where to put the sponge, if a little more deeply, I think it better
On 2016-02-09 22:14:32
Foundation is light and poor usability. Necessary weight.
On 2015-12-24 16:53:13
I think that good for the price, but the fulcrum of the base is too weak.