The reviews are automatic translation.
For the hinge of the apartment entrance door, installed between the existing hinge for construction adjustment
On 2018-03-12 14:15:10
Normally, the door closer and the door are removed and the washer is installed
Can be installed from the outside
Because the entrance door has come down, it is for height adjustment.
On 2017-09-08 07:50:24
The entrance door came down and the lower side was rubbed when opening and closing.
I was looking for a spacer, but I could not find a suitable one
I tried buying a washer you 2 mm.
It was nice to be able to install even one person without having to remove the heavy door from the frame.
It became able to open and close smoothly without rubbing.
Adjustment of entrance door
On 2017-07-10 16:53:28
I used 1 mm when the door got down and rubbed against the bottom frame. The door is now moving smoothly. I am inserting it while looking at the gap above 2 mm. Previously, I removed the door and put washers, but in this case I can install it just by floating it, so it can be constructed in a short time.
Adjustment of door height
On 2017-05-30 21:21:50
Construction time is less than 3 minutes. It was very easy to adjust.
Adjustment of door opening and closing
On 2016-08-15 07:59:56
I think that the price is too high though it is a good product.
Used to adjust the old steel door's butterfly
On 2016-05-23 15:36:33
It is easy to install it as a spacer easily without removing the alum and it is very satisfying.
I used it instead of replacing the waste at the gate.
On 2015-10-23 15:08:38
It is the highest without trouble. If possible, if there is a thing with a diameter of about 12 mm, it can be used for indoor doors as well.
For lifting the door at home.
On 2015-09-06 14:46:15
1 The door lock of the entrance door was used to adjust the receiving side and it got caught by the outside air temperature, so it was used to lift the door and lock it smoothly regardless of the outside air temperature. I paddled under the 2 door, lifted it slightly with bar, and set the washer. Silicone grease was applied to maintain lubrication. 3 I was worried because it was written that some of the reviews were written when using it, but I do not know why this shape (ears? Are processed) why they come out. I think that it is well done. 4 Anyway, I could set it very easily, I was impressed. 5 I feel that the price is a little expensive, but I think whether it will be like this considering the material, processing, demand, etc., I do not know ...
Steel door adjustment
On 2014-06-24 18:56:19
Ideal for adjusting old steel doors. I can build it without detaching the door, so I will go to the artificial part but the product fee is expensive.
Correct distortion of door mounting bracket
On 2014-05-01 17:15:22
Easy to install, effective for troubleshooting