The reviews are automatic translation.
On 2017-03-28 12:38:41
Those of small size tend to come off a little at high temperatures, but we are firmly under the same conditions as those of large size. We have to prevent peeling is applied around the sealer if necessary.
Unity of the wire
On 2017-02-06 20:55:55
Insulation lock I want to strengthen the part passing.
Base side may be damaged when through the thick insulation lock.
Fixation of the device wiring
On 2017-01-16 09:26:29
And that some paste of double-sided tape is sticking out from the base in the rough, because the double-sided tape base (sponge) is soft, it is a force in the horizontal direction is applied and easily deformed.
Motorcycle, has been used in auto maintenance.
On 2016-06-23 15:06:57
When there is no place to fix the wiring, but was used to secure the wiring in the band attached to the flat part, it is very useful because it is inexpensive.
On 2016-04-26 07:18:13
Always use, is the price of the issue. There is no problem with the product.
Indoor equipment wiring
On 2015-12-18 22:16:38
When used was thought that so so there may be those adhesive force, but the majority had been peeling After half a year position was. If you look closely, the pressure-sensitive adhesive surface is remaining still at a sponge-like adhesive tape had been separated into equipment. The quality of the adhesive tape is too evil. All are large damage in again. Do not buy again.
On 2015-10-29 17:58:45
Adhesion after degreasing is good. Since you are using a pasting trailing edge and sealing durability of the product is unknown. But one point of frustrating, can not be carried out smoothly sticking to tape part of the center when passing Thailand, adhesive wants to improve the lead to until it is peeled off in some sticky Thailand. You will not be able to reduce the center of the hole.
Electric Works work
On 2015-10-29 05:43:00
It could be used without any problem.
I think not peeling off in long-term use because both sides of.
On 2015-08-10 17:37:04
Temperature and it about 35 degrees
It would adhesive melts
Use an iron part.
On 2015-05-16 19:14:24
It is quite the pressure-sensitive adhesive, it may be powerful.