The reviews are automatic translation.
On 2016-07-29 20:36:36
You can use it properly, but the part of the handgrip is shifted w
Loosen fastened screw
On 2015-03-17 19:22:28
L side = When it is loose, it was to strike with a hammer while putting force in the direction you want to turn but when you hit it turned to R side = automatically tightening, it was tightened rather than loosening.
Maintenance of motorcycle engine
On 2014-11-28 17:03:49
Beginning with the 3rd screw, the tip of the bit twisted and it became unusable (+ 2) (+ 3) Even if you loosen 5, there is no problem at the moment.
Remove the screw of the grip end of the motorcycle
On 2014-04-27 17:13:22
A screwdriver that did not do even Piku with the usual driver and the slippery gloves with the power of chagrin and put it in, but it was awkward, but when I used this product I loosened around (properly). Although it was an explanation that it beat the head while turning with the grip of the impact driver, although the grip of the red plastic went round and round around the point, it was no use at all, but by pulling out the red grip and removing it, hold the metal part firmly Went fine when turned. 【Improvement requested point】 I want the grip not to be rotated. Without grip, it was cold because it was winter, it's hard to put power.
Opening and closing of screws not touching outdoors for over 10 years
On 2014-04-25 08:02:38
Motorized impact, manual work only crushes the screw head but this one opened with a blow. I think that the bit hardness is also very good. I think whether there is also a bit a little smaller.
Loosen the screw of the motorcycle crankcase.
On 2013-02-17 20:29:06
The screw loosened easily. I will loosen the rubber of the grip, I think if you fix it with adhesive on the manufacturer side.
Loose anchoring screw in motorcycle & car pit
On 2013-01-19 13:17:29
As a matter of price, with a solid and solid structure, you can work with confidence during hammering. Things that I used to date can not be reversed, but I'd appreciate it's possible to reverse by switching. (It also supports reverse screw) I do not expect the attached bit, but I would like to figure out how durable it is.
On 2012-09-16 18:48:11
You can use it enough. Switching direction of rotation is a little lost. While using it I understand "I'm getting this way", but I wonder if there are simple instructions.
On 2012-07-13 13:14:17
I am firm in proportion to the price. The direction of rotation can be switched.
On 2011-12-15 19:19:12
I used it for removing the brake drum. I could easily turn fixed screws. Impression that it is heavier and heavier than I imagined, well-built. I guess it's okay if I strike a little roughly. It is saved during cold weather that the grip is made of resin. Since there are six bits, it seems easy to fit the licked thread groove.