The reviews are automatic translation.
As a spare
On 2017-12-22 21:49:16
We stock it as a spare. It is saved when it comes to emergency. The place where it can be applied to various cars is the biggest merit.
When car inspection and maintenance
On 2017-05-23 21:20:20
In the past, I was working with the drive shaft pulled out, but after using this stretched boots once, the working time was able to be shortened considerably, mainly using this type, there is no particular problem with the aged deterioration of the rubber after that It seems.
On 2017-03-19 18:31:51
Repair of the cover breakage at the seam of the center drive shaft of the 4-wheel drive of the H10 Wagon RCV 51s. Although there is no parts and installation is not purposeful, it prevents grease leakage and vehicle inspection is also passed. I hope it will be a bit cheaper. Since the corn and the tool are high, I used two flathead screwdrivers without using them, and it stretched out and crossed the shaft 88 pies. It grows well, but it requires considerable strength.
As a replacement part when boots are damaged
On 2017-03-13 23:26:10
Although it takes a little more trouble than cracked boots, it did not have durability problems and used it many times. It can be used for a wide range of car models.
Italjet, front stool boots
On 2016-04-20 11:54:47
When I got a little steering wheel full, boots pleats but I could install it. To remove the hub, a puller of about 100 mm is required.
On 2016-04-07 08:17:48
While ordering 2 items, there were 4 scratching kisses on 1 piece, there was a defective item, but we informed that to monotaro so on the same day, we shipped the replacement item on the same day.
Used for old cars etc which parts were missing.
On 2016-03-28 13:00:10
Durability is .... I have tried it with my car, but I have used it for several years without any problem. I am saved because it can correspond to various car models.
Drive shaft boots exchange
On 2015-12-17 09:59:57
I have been using the same product for several years in business, but there are no such problems as losing quickly now. I can replace bearings without roses, so I like it because it can be replaced in a very short time. Although the part of the matching type has less part, there is little grease leakage and cracking from the joint part, so we are currently using only this.
On 2015-08-13 23:56:16
I am concerned about durability.
Foreign car general purpose
On 2015-02-28 17:16:01
Although it was machined and mounted, it was able to be used without problems in terms of size since it was fixed by band processing.