The reviews are automatic translation.
Maintenance and adjustment of the camera system for the positioning of the large horizontal drilling machine.
On 2016-08-13 22:08:09
It is best to fix the jam nut of loosening.
Repairs to the machine
On 2016-08-05 17:30:06
Since there is no place that sells this product in the shop was saved.
For adjustment of the machine tool
On 2016-04-18 20:42:59
I bought in applications where turning the lathe razor of the adjustment nut.
Because so much is also not necessary to apply a torque, it chose an inexpensive this product.
Since thin is a good feeling not in the way of the hex wrench.
To close a simple open
On 2015-11-03 17:51:26
Development of bicycle
On 2015-09-14 15:19:21
It was purchased in order to turn the 5mm nut of the dial gauge measuring element.
When the width of each spanner try measured by calipers
4mm → 4.1mm, 4.5mm → 4.55mm, others and ± 0mm
This accuracy by press working is good.
Nickel plating process is performed on the thickness of 1.8mm iron plate,
The luxury of strength and finish does not expect a small nut, etc.
You can use enough to use.
There for to use to put the force from more than 5.5mm are third-party products are available,
Among there is not much that can be used in less nut, price-to-performance balance
I think that good commodity.
Tightening of the small nut
On 2014-11-19 20:50:47
Contains the previous spanner also to the place where the hand does not turn, was able to work. It was thankful.
Precision machinery maintenance
On 2012-10-12 22:19:05
Sizes up to 5.5mm are available at home centers, but less size are very useful because it does not go to hand. Until now it had been used as a substitute, such as pliers or tongs but had or did not take off well or got hurt nut.