The reviews are automatic translation.
Used for commuting vehicles
On 2018-02-21 05:45:49
I bought it with lock nut.
Although there is a sense that I feel a little uneasy factor compared with the strength of steel
We are lucky to be lightweight & correspond to the special size of HEX 17.
After replacing the bolt the length is not enough for 30 mm.
On 2017-01-11 21:12:53
It is truly light. In the case of replacing the bolt, I purchased it with a planned surplus of 5 mm at 40 mm which is not enough. It is calculation theory. A few millimeters is screwed hard and screwed little by little. I use it without any problem. If the socket is used long, it will not hurt at all. The appearance has improved.
For aluminum replacement
On 2015-05-09 23:04:04
I bought it as a lightweight even a little. Especially when using it there is no trouble. Although it will be scratched during installation, I think that it is such a thing because it is aluminum, but it seems better to do torque management properly.
On 2014-12-11 16:35:39
I used it immediately after purchase, but it did not become usable at all. After tentatively attaching and trying to remove it after tightening it broke from the middle part of the nut and you could not remove two wheels and eventually it was a big work and two wheels were to be discarded. It is very regrettable that the tightening torque was tightened with the torque specified by the aluminum nut. The accuracy of the inner part of the nut was also very complicated.
To dress up. . .
On 2012-05-27 17:58:59
For the time being, I tried to try one pack, I bought it, but I got hurt just by holding the box wrench's frame directly with my hand. . . Because it is aluminum, if it says nothing is wrong, it may be scraped if you tighten it with a tool. It became disappointing shopping. Perhaps it was good to have completed with one pack.
It is used for time attack on gymkana competitions and circuit running.
On 2011-11-28 17:29:07
It is very light as expected, about 19 g in one type, when actually measured with a type of 17 mm across and it is less than half of that of about 42 g of the chromoly racing nut, making it lighter than 100 g by just the nut for the wheel It was. Considering that aluminum is less durable, I intend to use it for one attack time attack.
On 2011-08-22 16:41:06
Because the outer diameter and the center axis of the screw hole are misaligned? It rotates distorted. Also, it is astringent that you can not turn with your fingers even if it is loose. All 20. I do not know whether the pitch is loose or whether the mountain has become thin, but I am giving up saying, "Because it is aluminum, it can not be helped." It looks cool. It is not a claim.