The reviews are automatic translation.
Air piping for oil mist to the lathe
On 2017-11-18 18:07:48
Although it is a cheap product, it is satisfied without air leakage.
Used to create passenger car self made air suspension
On 2017-08-19 21:06:17
It is sealed to the screw part, it does not take much labor, and even after tube insertion, Oita Air pressure is applied but air leakage does not occur without problems. The price is cheap and very helpful.
During machine maintenance
On 2017-08-05 16:28:14
It is used at the time of maintenance of the machine, because it is a low price that can be used normally, I will also purchase it next time.
On 2017-08-02 17:27:04
Other people are also written, but the screw precision of R1 / 2 seems to be wrong.
I thought that the thread pitch is different as it gets harder by about 1 turn.
There was no problem with fitting and detaching with the tube, but it seems that abnormalities also occurred here elsewhere, is it a comprehensive problem of manufacturing accuracy? . .
I'd like to use it because the price is cheap, but in the case that there is no vice on the site, it is a thought because it is hard to tighten with a pyrene or a water pipe wrench.
Machine installation work
On 2017-07-04 16:03:31
The quality was able to be used without any problem.
Shipment was early and it was saved.
On 2017-06-24 10:47:08
The price is also very cheap and I am using it normally. After that it is durable.
Repair of air suspension for automobiles
On 2017-04-16 08:07:05
The price is reasonable and can be used without problems. We will purchase again the next time we repair.
For aeration piping
On 2017-04-15 20:40:37
Anyway cheap! . I should have bought a little more at once.
For air piping
On 2017-02-23 15:09:56
I bought this product instead of the manufacturer's product (SMC · CKD · PISCO · Chiyoda etc.) but tried using it. However, desorption of the tube is very difficult compared with the manufacturer's product, it is a feeling of pulling out forcefully. Because the tube is using the manufacturer's product, fitting accuracy of this connector is bad or compatibility is very bad. If you do not do detachment, it will not be a problem separately, so I think whether it will be used as a divulged use.
Increase instrumentation air line
On 2017-02-11 02:10:18
Screw diameter is strange as it is in other people's reviews. Because we could not fasten more than just screwing in about 2 screws leak occurred and it became useless. I verified the combination with other fittings, but I confirmed that this product is bad as I confirmed that only the fitting of Osaka soul can not be screwed.