The reviews are automatic translation.
Joining a thin wooden frame ...
On 2017-10-27 14:37:30
I used M6 bolts to connect the painting crates that are only 2.5 cm thick. I used this ball point bit, because the motor part of the drill will crush into the compact which is stretched. Since it can be bent about 30 degrees, I could easily tighten it. It is quite useful.
Temporary fixation of jig thread
On 2017-02-04 21:24:50
Those turning with L shape hands is hard to use unexpectedly if it is a complicated place, but it is convenient with an impact driver
On 2016-04-11 21:50:08
Even in situations where the bit is not perpendicular to the bolt as it is a ball point, it can be tightened without difficulty. On the other hand, a bit bites into a bolt hole and is cheap. Also, if you are unfamiliar with handling tools, with the current 18 V impact torque, it's a bit head if it is 4 mm size. Beware that it will break the bits from the constricted part of the ball.
On 2014-08-01 01:28:05
I think that it will become a standard in the hex for impact, and at the ball point. Reach and accuracy are good products like Bessel, cost performance is the best. In the field of sales where speed is competitive, few tools with irregularity are indispensable, but I am just satisfied.
On 2014-01-16 14:18:53
I bought it because I lost the old one. It is the first time to become a taper type. Since it is a brand-new one, the bite is good, and even if it faces downward, the bolt never falls, so the workability gets better.
Assembling a profile
On 2012-01-22 00:47:30
It can be used very. Crispy work progresses. I also purchased people around me.