The reviews are automatic translation.
Used as a hip instrument of electrical work.
On 2015-10-11 13:15:49
Although off well in both single bar double bar
Those that exceed the width of the blade is difficult.
Cutting of brass and stainless steel
On 2015-01-04 12:09:48
Materials exceeding the width of the blade are very difficult to cut. Also, when cutting 0.8 t of SUS 304, the blade spilled. A product that only laughs (laugh)
Cut 0.8 piece of iron plate
On 2014-08-16 23:19:26
There is no escape of the iron plate, only the width of the scissors can cut. I bought it and failed. Larger steel materials of larger thickness are not suitable.
Cutting of light roof material
On 2013-06-24 19:20:37
I think that cutting ability is not a problem, but I thought that if the opening of the handle is a little more, it will be easier to work with one hand.
Ceiling opening etc.
On 2013-03-28 14:47:50
Lightweight Used to cut the ceiling substrate. Although the sharpness is outstanding, since the opening is small, the M bar can not be cut at once, but it does not become difficult because it does not apply force because it is a multiplier force
Cutting of 1 mm thick SUS 304 plate
On 2012-10-14 16:39:57
We cut 1 mm thick SUS 304 with a cheap bin force shears up to 0.6 mm stainless steel, but we introduced this product with boost capability that can cut up to 1 mm because it is too tiresome. As work, there was improvement to a degree, which makes it a bit easier than before. However, I think that it is considerably bare ability to stainless steel 1 mm. It is easy to cut by boosting structure, but it is painful for people with small hands, because you can not fully utilize the blade unless you open the handle gently. Since there is no function to cut without lifting the board, basically there is only a cutting ability enough to cut with a straight line of one cut. I think that there is no one who does not notice, but the U-shaped board in the example of use is cutting it with a V-shaped slit in it and it is not cutting the folded part as it is.