The reviews are automatic translation.
Submerged wood screw drilling
On 2017-07-20 09:04:19
This is terrible.
Although the shaft diameter is written as 10.0 mm, actually it is also 10.14 mm to 10.15 mm.
Predictable causes are wear of tools to cut this tool
Whether it is not measuring whether it is within the correct diameter after cutting or not?
For hidden screws of woodwork furniture
On 2017-07-14 11:56:33
As expected, the set screw (potato screw) protruded beyond the trunk diameter of 10 mm, which is about 12 mm.
In this relationship, the embedding depth of φ 10 mm is limited by the set screw.
Since low-profile set screws are also aligned with a monotary, we will buy and replace it, but it would be even better if the manufacturer makes it a short set screw from the beginning.
Use angled adapter, which can be drilled diagonally, to use it to open a step of 10 mm at an angle of 30 degrees.
Column Corner Hardware Installation
On 2017-02-18 15:31:55
I used it for drilling aluminum L angle. I am very happy with ease of use.
Open a lot of holes for dish screws in cherry tree laminated wood
On 2016-12-27 18:27:46
Drilling and dish can be done simultaneously, greatly improving work efficiency. The finish is also beautiful.
Thick to plywood
On 2016-12-18 17:01:13
The sharpness is good. However, because it is "NS plywood (siliceous sandwich version)" this time, it wears quickly.
Production of wood deck (DIY)
On 2016-10-14 18:52:48
It was smoother than other products. Unfortunately, it is not possible to attach the jig for adjusting the depth to the target depth, so you need a separate spacer. (Because it overlaps with the place of the Imonjiji)
On 2016-05-23 22:25:29
It is very easy to use.