The reviews are automatic translation.
Power cable fabrication work
On 2016-09-08 13:00:26
If you do not do to ensure the first adjustment, because the hurt a coating of internal wires, there will carefully please. Satisfactory is a commodity.
14SQ, covering of 22SQ wiring Strip
On 2014-08-09 09:26:02
Because it does not cut than I thought is the purchase plan to another type.
I wonder if expires expensive ones?
It may be higher if expires. . .
Cable wiring, connection, crimping terminal and the mounting, etc.
On 2013-07-02 21:17:32
Has become a depth adjustment can be the structure of the cut part, but only used once, I thought that use goods. Can be the circumferential direction and the longitudinal direction of both directions, you will be satisfied. In addition, a wide range up to about 4mm ~ 28mm, also can be used, good. The question is, some endurance portion of the blade is how much? worry.
Purchased for peeling of CV cable
On 2012-02-13 20:07:41
During the work, the blade was broken for no also mean pulling particularly unreasonable.
Information of the blade in exchange try even without the exchange of blade Once the decomposition has been found to be very troublesome to it.
This can not be used, I think.
Blade does not look, will buy a different type.
It uses as stripping the coating of the power supply wiring,
On 2011-10-21 23:43:19
Until now it is pulling in the nippers, etc. Put the cut with a cutter knife
It had been stripped covering, but since only turn across, good efficiency and finish is excellent
Peeling of the wiring. DIY about
On 2011-07-04 18:48:19
Or how to use went wrong, whether the commodity is wrong, it does not have normally tried the skin is aimed.
On 2011-05-13 23:30:29
Accustomed I think is that it is necessary, but not accustomed to the system to rotate the blade in the lever on your own, is very poor workability.
Slightly larger and heavier compared to those that had been previously used, in the way in waist bag.
Try a different manufacturer of the goods.
Automobile, home of indoor wiring
On 2010-02-16 09:47:02
5.5 or less of thin cable was not aimed well, but towards clean early if to some extent thick cable.