The reviews are automatic translation.
To reduce the diameter of the shaft hole of the pulley
On 2017-05-05 23:24:26
The accuracy of the inner diameter outside diameter was high and it was possible to install without processing anything.
It was used as a drill stop
On 2017-03-15 15:25:19
Very inexpensive and uses some of the size as a drill stop.
Attach the parts to Paul
On 2017-03-14 08:58:08
Set screw is had about the two places, can be the one for component mounting, it is useful.
Since the rotating rod of the device is bent diverted to cut the driver, used as a stopper at both ends.
On 2017-03-11 16:17:20
Dimension as expected with a clean finish, was able to firmly fixed to the shaft with two screws.
Purchase in order to fix the bearing
On 2017-03-04 14:50:49
It was purchased in order to fix the bearing.
Inner diameter size of the shaft was also good so choose.
I made a sheet metal tool.
On 2017-02-21 18:20:19
Cheap and convenient. Far cheaper than making the size are many there.
Positioning of linear shaft
On 2016-10-17 16:28:15
Accuracy is also good, the finish is also good.
But it has been the model number such as a laser engraved,
Since the small size can not see letters, without engraved
If you lower the cost was good think.
Out center of the bike tire
On 2016-09-30 21:05:20
Accuracy was very reliable commodity high. It was more good and kind of width can be chosen more finely and 4.5.6.
We used to repair of the wheels of the carrier
On 2016-07-24 22:35:06
Accuracy is also high, and we were able to assemble in the street plan drawings.
Applicability of a precision machine is unknown, but it is enough satisfactory product.
Two used as a pulley shaft hole repair material (Bush)
On 2016-04-01 21:05:12
Various parts processing accuracy very good for satisfactory results were put out.