The reviews are automatic translation.
On 2015-06-28 17:42:30
Good to cheap ones are not.
Wrench is useless.
Used in the FRP of the type modification
On 2014-10-23 13:31:56
Wrench attached is in the second day, it is worried that can firmly hold the cutting tool becomes a lick so at the time of tightening.
In addition, completely even licking the future like a matter of time, we are pondering what to do.
Too, it can not be recommended.
After machining, the details of the deburring
On 2014-09-01 09:33:43
Easy to buy cheaper than other manufacturers, whether the life of the air motor and bearings? Currently in use
For investigation of thermosetting resin, used for resin scraping
On 2014-05-31 16:15:50
Power is amazing. If there is a tip tool set, it will be saved.
Peeling of plating
On 2014-01-23 08:47:57
I wonder if the spinning speed is a bit faster, I bought the other before, but due to the high price, this time I made this item, if the price is too much like this
Inner surface removal of metal pipe
On 2013-08-29 19:24:09
Rapid speed and workability is good
On 2013-03-20 01:14:28
The hose from the main body and the joint of the coupler are in good condition, it comes off immediately and becomes useless at all. Please exchange immediately.
Drilling grinding deburring etc. of pressed products t 0.8 ~ 2.0 etc.
On 2012-05-18 22:27:18
Axial accuracy is not good. The cutting speed is fast because the rotation speed is 58000 rpm, but the vibration is strong and the finger becomes numb. Also, due to the low rotation speed, the axial center accuracy is low, so if you attach a heavy knife or long knife, the internal bearing will be broken in about 10 minutes. After all, I replaced it with the spindle and vane motor of used parts of Air Sonic manufactured by Nitto Kohki Co., Ltd., and further modified bearings at the tip to use it.
Engine exhaust port processing
On 2012-04-26 10:49:58
It seems that there is a slight blur in the core of the rotating shaft, it can not cut smoothly with a little wiggling. Is it inexpensive so low accuracy is gaming?
Diasast product file
On 2012-04-23 13:16:45
It's small and easy to use. I will not last long. . Since it is a low price, I purchase it several times as a consumable item.