* Products that meet your criteria are shown in
- Color Temperature (K)
- Kit Contents
- Hi/Low switch burner x 2pieces
Ballast x 2 pieces
Exclusive Control unit x 2 pieces
Mounting screws, tie wrap type x 1 set
- Rated Voltage (V)
- Power Consumption (W)
- H4 (Hi/Low switch)
- Car inspection supported product
Customers Who Viewed This Item Also Viewed
| 5 star
| 4 star
| 3 star
| 2 star
| 1 star
5 Customer Reviews
The reviews are automatic translation.
Running at night
On 2015-05-30 13:12:50
Firstly purchase one set and entrust installation to a trader. Although the test before installation was OK, there is a problem of turning off after mounting, turning it up and down several times. The result of returned goods and inspection is "No abnormality, what is caused by having the ballast brought to the body earth?" Although there was no note in the instruction book, the reply box was filled with reprint notes in reprinted box. Again, it was good as I installed it on another vehicle, so I purchased 3 sets of other vehicles. However, one could not be installed due to the protrusion of the rear part of the burner. I will enclose a manual for ballast attachment in the future and I would like a lineup of type that does not have protrusions at the back of the burner. Evaluation of the crew is superior. I think that the optical axis is clear also by switching up and down and it is a reliable product. We responded in good faith against defects. Thank you very much.
On 2015-01-26 15:15:37
There are cheap and similar items from other manufacturers, but I chose it from a sense of trust "if it is Monotarou." I installed it to Heisei era 2006 Isuzu Elf 2 t standard body (NKR 81 type), but since the indicator at the time of Hi beam in the instrument panel ceased to light, it was confirmed that there is a car that has such a phenomenon If you come, I would like to inform you beforehand if you would like to notify us of warning points or some countermeasure methods even in the product page, or if there are any countermeasure parts as a separate product. Another point, 24V exclusive items will probably be to be attached to the truck in most cases, but since the distance between the light unit and the battery tends to be far away, longer wiring of the power supply system is made longer I think that it is still better if there is. Although it was evaluated as such with the above points, although it is a bad product, it is not a bad product like suddenly the burner has burned out or there are extreme differences in color temperature on the left and right, so it is under consideration I think that it is relieved and good product in the direction
On 2013-12-08 16:41:11
Within one year after installation, Hi can not be done and it responds by returning it to genuine halogen every time at the vehicle inspection time. Lo is bright without problems.
For night driving!
On 2012-08-27 19:40:49
I have not run at night yet! Since exchange balls are not on the catalog, I am worried about breaking bulbs! Are you selling it?
On 2011-04-12 10:23:25
It is easy to install more than I thought very good, still brighter than I expected It is safe on rainy days with this. The difficulty is that only dedicated valves can be replaced
Customers Who Bought This Item Also Bought