The reviews are automatic translation.
Replacement of the chair of the caster
On 2017-03-17 15:51:22
Whether the chair was too old, old caster is no longer quite Torezu, can be used will bend if I use the brute force.
Difficult to maneuverability, desorption of the parts of the case the gap is slightly
On 2017-01-24 17:50:42
But is a thin-walled imagine, build and can be firmly, Are You a 17mm size to mainly used, but I feel that even at the time of tightening open mouth of spanner without any, we have come in handy.
After the durability of the problem, and has repeatedly desorption, many things that go up in smoke, the carbon steel ability
Of is your Tenami look.
Because it is also inexpensive pricing In any event, if divisible and consumables, you really think that it is excellent good product of CP.
Development of bicycle
On 2017-01-15 22:50:38
Purchased for overhaul of the bicycle pedal.
The bearing ball press 10mm and lock nut 7mm of internal pedal
You are required to turn.
Suffice inexpensive plate wrench set that was purchased from the after, it does not have much turn.
I there is a sense of satisfaction from making good though.
Paint job, etc.
On 2016-11-29 21:17:27
Use from the Thunder to remove the cup brush. And thinness to enter the gap, is it just good robustness that removal of the yelling closed cup.
On 2016-11-02 20:25:12
Inch standard is the main case of the bicycle bolts JIS
Between the case nut surface is 14mm and 15mm and 17mm
Here Rashiku shop often is 14mm and 17mm wrench is that there is also the home improvement
What about in the 14mm and 15mm
Maintenance of machinery
On 2016-08-07 11:46:41
Things are made well. It is now on durability.
Work in a narrow place
On 2016-07-21 18:05:27
We ride to Ninja250R. Because with a carrier of GIVI, you do not have clearance to enter a normal wrench also to use the tightening of the nut of the mounting portion of the rear turn signal. This wrench is a 3mm thick, it will enter without any problem. Since the inspections and increased tightening of the components for vibration often bike is necessary, it will come in handy.
For engine maintenance
On 2016-04-07 23:24:38
Used to remove the cylinder block, I bought so cheap.
Caster replacement of the chair
On 2016-04-05 17:56:56
Have a sufficient enough to use strength, it is where you can not work not to be this thin.
Also contact the office equipment manufacturer, it is a tool that has not returned a valid answer.
We are satisfied.
On 2015-11-29 09:44:09
Frequency of use is very cheap good because low. It feels even low to thin minutes or more in strength, but can be used.
Those even less an alternative to this, it was good to buy than sharpen an ordinary wrench.