Especially it was able to be used without problems. This time it was an emergency response, we corresponded with thickness 0.5 mm. I regret to say that there is no stock in the thickness of 1.0 mm, it is a substitute. The quality was satisfactory.
For adjustment of the end face gap of the speed change pulley of the milling machine
On 2017-05-16 21:08:17
Since the gap was 0.4 mm, we inserted two shim rings of thickness 5/100 mm on both upper and lower end faces, and adjusted the gap. The accuracy of the product was very good, it was a wonderful result. The noise was solved.