The reviews are automatic translation.
Fabrication of etching parts
On 2017-11-30 18:22:43
Used as material for etched parts (glasses) for figures. I made it with so-called F-type, but the same 1 mm thick was brittle because the finish was thin, the thickness here was appropriate.
On 2017-10-02 10:50:29
Although we have purchased it several times, two corners have been bent in diagonal with a thing of 0.15 thick this time. Although it is packing in vinyl on the cardboard cardboard, it is feeling that the vinyl size is bad or the corner has broken as it diagonally shifted.
Although it was packed with other things, I think that it was bent at the time of packing rather than being bent during transportation from the feeling of packing.
Parts which can not be used considerably will come out, so please make improvements.
On 2017-09-23 11:52:01
Although the goods themselves are satisfied, I would like to improve the packaging.
Since a brass plate of 0.1 m thick was put in a box together with other hard accessories,
There were many unevenness.
Used to create windshield of brass gasoline stove
On 2017-04-09 13:49:35
I made the same thing by imitating those who introduced you with tubu. 0.5 mm thick was exactly right for bending. Brass is satisfying because it will be clean if you polish it.
Hydraulic certification centering exercise
On 2016-11-03 14:04:20
I am satisfied with the product itself, but I want you to improve packaging. Because the shim plate is thin, I want you to sandwich it with two backing packs and pack it.
Automotive electrical equipment
On 2015-06-23 11:50:30
Used as the handlebar boss horn contact of the old car. The next purchase is undecided, but usability is outstanding. I think that it will be active in various scenes.
Cut and substitute bearing shim
On 2015-02-06 11:27:59
It was a good product without dissatisfaction in all of packing, delivery date, and product state. It can be substituted for an expensive bearing shim, it was saved because the delivery date and price were suppressed.
Decorations around motorcycle meters
On 2013-01-19 09:52:44
Perhaps it is different from the way you used it. Since the plating on the indicator surface such as neutral was peeling and dirty, I made a cover with this brass version. Appearance was an important use, but the factory cut was beautiful and no problem. Things used were t1 but if you worked carefully it would not bend at the time of drilling and sanding. There was a slight scratch mark on the surface at the time of arrival, but it became somewhat clean by polishing. I have not planned to use repeat at the moment so I decided not to continue purchasing, but when using repeat