The reviews are automatic translation.
About 100 g of food conveying bracket
On 2017-09-01 08:50:38
It was used for 2 mm polycarbonate cutting. Cutting surface is good, it is cut out
I am satisfied.
I feel bent because the hold down is bad. An external clamp is necessary.
If you overtighten the pipe mounting bolt of the lever, the pipe will bend (a spacer is required inside the pipe).
Cutting of material
On 2017-06-30 08:58:27
3.2 mm ss 400 has expired. A5052 of 8 mm was impossible (laugh).
A 1 mm brass plate can be cut like paper.
The body size is not that large, but the lever is long. It seems to be solved by using a hydraulic jack.
Since there is no table on which the material is to be placed and it is necessary to move the lever while holding down the material with one hand, it seems to be convenient if you make your own around this material, including material control.
Also, it is quite heavy.
Aluminum plate cut
On 2016-06-27 05:23:48
I cut it with scissors and electric tools for metal so far. Once I got to cut it with old-fashioned large shearing at the factory of my acquaintance, I was surprised by its workability, "Is there anything that can be cut easily like this?" I got to this product as a result of searching various things at once. In the photograph I was imagining 50 ~ 60 cm, but actually it is 80 cm in length of the handle alone, in the state of the photograph it exceeds 110 cm and it is quite Gotsui so please be careful. We cut aluminum plates of 2 mm and 3 mm, but it is the best for now. Although it seems to be able to cut down to 30 cm, it can be cut in just a few seconds, even the work is fun for much simplicity. It became a goods I think that I bought the best in the past few years. I just thank Monotaro because I could buy it cheaply with coupons.
Cutting of aluminum plate and PVC board
On 2016-06-10 14:44:19
I do not know because the aluminum has not cut yet, but I bought it because the steel also expires. First I tried cutting 2 mm of PVC board, the work which had been hard worked ended in a few seconds of things and the cut was also very beautiful so I did a lot of post-processing as well. We are planning 3 mm of aluminum board in the near future, but it is a perfect score so far. Acrylic was broken indeed and it did not cut. It was 5 times bigger and heavier tool than I thought from the photograph.
On 2016-04-25 13:03:26
After placing an order, I noticed that the campaign discount was not reflected, but I got frustrated by a childish answer. Is it possible to revise prices after ordering is a system problem or a personnel problem? Judging that it was a waste of time, the goods arrived late at a later date after paying at the normal price, but the package has damage, damage to the contents body as well. I felt the appeal of the campaign price, but the request for payment of regular price. Even if you inquire, only answers of meaning unknown. Those that arrived are iron scraps. I really regret it. I do not want to go shopping again.
Cutting of hardened ribbon steel strip
On 2016-04-08 14:25:44
I tried 0.5 mm thick quenched ribbon steel (hardness: Hv 500) at hand and it was easy to cut. I think that it is an outstanding tool for cost effectiveness!
On 2015-10-29 00:04:35
Because there is no clearance adjustment function, it seems that the iron plate can only be cut to 1 t. If you modify it with a milling machine so that the clearance can be adjusted with a spacer, it may be able to go even at 9 tons.
When cutting a thin plate
On 2014-03-24 15:41:39
I bought it thought that it would be used at the work site, but I think that the commodity itself is satisfactory because it is difficult to cut unless it is fixed with an anchor.
Cutting of aluminum and copper plates
On 2013-09-04 13:27:56
Although I am not at work, but I make various things with my hobby, I had a hard time cutting the aluminum plate copper plate so that I can thank so beautifully, so easy. If detaching of the handle is easier.
Cutting of iron, SUS and aluminum at t 0.5 ~ 2.3
On 2012-12-16 00:08:22
In my power, it seems that the limit of cutting is stainless steel t 1.5 mm, mild steel plate t 1.6, aluminum t 3.0. If you can cut t2.0 stainless steel, I bought it with my own thought, but it seems to be difficult. It is possible to cut it if the width of t2.0 stainless steel is about 10 mm, but width 40 mm was impossible.