Soldering of telephone terminals
On 2014-12-25 05:49:33
The soldering in a weak electric terminal, shape would say to, try to use, I think that easy to use. But only one, there is a drawback. If even in the back of the tip it was continuously a plurality of terminals for around the solder, solder will fall down.
It is to find a soldering iron and a tip, from this catalog, it takes a considerable amount of time.
After you determine the soldering iron, it is hard to first find whether the tip is fit. When the size of the tip is not to be displayed in a separate window, than do not know, it takes a considerable amount of time. It took about an hour in my case.
Solder surface mount (lead-free) with work
On 2014-09-10 14:20:10
Such as SMD and chip parts, we use the soldering of surface mount.
Surface mounting using lead-free solder was also possible without the moment problem.
On 2013-03-03 02:05:31
Stock up was try to buy because it was over a period of no longer, but has changed the conventional product and shape, and some of the work had become unusable. The conventional product, but the tip was about 30 degrees of the flat shape (minus driver-style), current products, there about 45 degrees, do not fall into the gap that has been entered so far. Not missing even alternative. Goods, we are puzzled. To begin with, this only Different shape, it should change the model number.
In addition, solder plating also range is narrow of the distal end portion, difficult to use. But seems to be intended to improve the thing in convenience to limit the scope of the plating, using a range of solder plating spreads so within that, rational is better that there is plated on the whole from the beginning. Limitation of the plating, also well in the amateur-friendly, it is only inconvenient to the profession (because the use is limited).
The improvements shape, after forming the plane at the tip of the round bar, attaching a are the corners (about 0.5 ~ 1mm). In the current situation, and that the cracking of the iron plating is generated from a portion of the corner lot, cracking occurs, will soon unusable. If life is extended by Earl processing, to about 20% of the price up is acceptable, that life extends leads also to be shown the height of quality, it should also be better received by the user. By all means, I want to wish tell the manufacturer.