The reviews are automatic translation.
Used at the time of precision parts production.
On 2016-09-30 19:09:23
By cutting metals (such as stainless steel) for hobby make watch parts and audio parts, you have to make the fine work while or measure the dimensions. Middle., The fine work at the time so precisely measurably Bring.
On 2013-05-23 14:25:45
Had to buy up to now, it has excellent far than Monotarou product. It is a very good accuracy. Monotarou's cheap it is for, but trouble often. Truly it is made of Niigata Seiki. Accurately you can use. Monotarou made calipers may be broken, can not be used only in places that even poor accuracy.
Size measurements such as machined components
On 2013-02-01 17:13:14
The future, we will carry out calibration registered plans to use as an official measuring instrument in-house. Price, is thought that the balance of performance is taken. Manual is difficult to housed in the supplied plastic case. Than may improve the case so that it can be easily accommodated?
Rough measurement, etc.
On 2012-10-19 20:10:24
It passed since 9 months to buy, but can be used without problems.
We used to use expensive things, I tried to buy because I do not need so much of accuracy considering the use environment.
(Since it is used a micro-meter If you exactly measuring ...)
Balance of price and accuracy is good think.
The battery that comes first with can not be used in the bonus like a thing. Since even the instructions are written to replace with a new battery (SR44) is also the battery of reliable manufacturer recommends that you purchase together.
Creation of the extrusion lot bar
On 2012-09-20 20:27:58
It is natural considering the price, but the minimum size is a vernier caliper to be limited to the order of 0.1 mm. There is an error of from 0.02 to 0.03 display (measured at the time rather than a mechanical backlash, etc., the display is different) is, of course, the minimum error is ± 4/100 is because the standard. By the way, mechanical caliper vernier caliper of this company is accurate, it does not have favorably compared with a certain well-known manufacturers.
Measurement of the workpiece on the bench lathe
On 2012-08-04 13:54:56
Price There was anxiety in accuracy because it was cheap, but the thing that was purchased was not particularly a problem. Buy it before was ordered to check the review, but did not feel dissatisfaction, such as those written by a person with a low rating. If you do not require a high degree of accuracy, I think that it is affordable goods.
On 2012-07-26 15:11:18
If this can be at this price, I think that it is fully satisfactory product.
If the hobby of applications, can be satisfied.
Thickness 0.00 Measurement
On 2012-04-11 22:55:24
Cost path Hohmann vinegar I think that it is enough. Whether a little cruel to say complain at this price, I think it should be used more than 10,000 yen if worry. I think whether it is better not to buy If you image a thing of superlative, but without it may be enough usability problems
Because it uses, in this class, but we believe that is the best way? Why?
On 2012-03-27 23:22:55
It is about the state of the goods arrival time.
- The lower surface of the goods the case has become a paper, the upper side of the packaging in plastic.
This paper part was damaged.
Since → nothing to do with calipers, it was the only thought that treatment is Do's sloppy.
• When try to take out the calipers, dirt also comes with something like, also think that the wound.
- On the lower surface portion of the display portion, is stuck is the product name was written seal, but there are rubbed bruise.
Not a high commodity, but it is a pity since it is not in the cheap goods.
On 2012-03-07 22:40:37
Accuracy with respect to price, I think that it is the enough passing score is a feeling of use. When it comes to finding a more level it seems that there is no choice but to buy things of a certain world-famous leading manufacturers.