The reviews are automatic translation.
Used at the time of production of the garage in the single tube pipe
On 2016-07-06 23:14:02
The length of the single tube pipe is using to cut the time long.
You can safely disconnect from the grinder.
Stainless steel pipe cut
On 2016-02-21 15:13:17
It is a good commodity ~
You can lightly cut and sputtering. 5 millimeters of cut of the pipe end also a possible, but 5 mm or less impossible.
Best to deal with as in the so a manual and would turn round and round from the beginning becomes a spiral pattern.
Anyway it is good to expire lightly easy.
Cutting of single tube pipe
On 2015-12-18 21:03:07
I bought on the cleavage of the single tube pipe with a thickness of 1.8mm, but it takes too much time to cut. Blade in about 5 times useless in tatters. Since the price of the replacement blade not be cheap, but now has been cut with a grinder.
Used for cutting of stainless steel tube
On 2015-10-03 15:01:42
I made a cutting of stainless steel tube with an outer diameter of 38mm thickness 1.2mm, but was able to comfortably cut manual street.
It seems there is also a replacement blade as an option, when they fall is sharp, I would like to buy.
SUS of gas piping
On 2014-12-13 20:22:02
Used to cut the pipe, such as 1/4, 3/8, 1/2 of the SUS.
Overall length is also affordable, piping space makes active in the ingenuity even in a narrow place.
Cutting the motorcycle handle
On 2014-09-09 13:24:11
Purchase in order to shorten the handle length.
So easy, it was able to quickly cut.
Cut surface is clean (Bali should take).
As a point to choose What abundance of bearings.
We were able to stably rotate a weak force in its favor.
Air conditioning plumbing
On 2014-08-18 23:36:49
Because it does not only copper pipe cutting, there is no particular trouble.
So you can cut with a light force, not too tired hand (← particularly narrow point).
Cut of Bali is little better, but it is a little anxiety to flaring.
Single tube pipe 48.6 2.4mm thickness cut
On 2014-04-14 17:28:24
15 blade Once the standard cut is now useless. You do it a little more patiently slowly, after 5-oriented'd go. I think that it is sufficient expires this number at this price.
Cutting of hydraulic steel tube (mainly 6 ~ 12mm)
On 2012-04-18 19:23:56
This may be quite lightly cut,
I'm glad I bought it.
On 2012-03-14 22:39:48
Because it does not use electricity, it is ideal for "little bit work". Sharpness was also cut with the problem without sputtering. Weight also uses put to always hip tool not to worry. It is very useful.