The reviews are automatic translation.
Maintenance motor exchange of machine
On 2016-08-15 16:49:52
Had preceded was the Mitsubishi motor.
It was good at Hitachi.
As the power of the packaging machine
On 2016-08-13 00:15:18
It was a genuine motor of the packaging machine. Much cheaper than the estimate of the trading company, it was very helpful.
On 2016-07-30 08:22:06
Toshiba is the replacement of the motor in the failure of the motor lucky to equipment using, but Toshiba is because of no production stop replacement, rating, size is almost the same, we used this motor of Hitachi. Mounting size of the base was slightly different, but we can be mounted in the extent to cut a little hole.
As a gear pump motor
On 2016-06-01 15:08:47
Previously, we were using a third-party motor, wear of the gear pump side bearing causes, we have to Yakitsuka the motor. It was delivered the next day in a quick response. Motor there is no perfect in power, the sound is also quiet and likely to rise the efficiency of work.
On 2016-05-02 14:24:43
Exchange did a band saw of the motor. It is very quiet and powerful
On 2016-04-13 21:08:49
The manner of connection of the forward and reverse to the nameplate be described, it was good.
Because manufacturers products can be used with confidence.
Since the compressor which is owned by the air pressure can not restart was not certain, I tried to replace the motor.
On 2016-03-27 19:29:12
I tried various checked on the net, but I tried to do from the exchange of the time being can not be good enough understanding motors, it has been stable and running at the moment. Car and tire replacement, is a farm equipment of cleaning are the main applications, but it is also inconvenient if the compressor is not. The pitch of the mounting screws also think just as well previously quiet is operating noise than.
Antenna, crank tower motor
On 2015-08-31 16:54:07
We are willing to work smoothly.
Canal water (sea water contamination) suction for drill pump drive
On 2015-08-18 10:23:14
You happy if there is a connecting member such option product of the drill pump.
① shaft diameter 14 mm ⇒6 Miri of coupling, etc.
② Even better if there is a rotational speed (rpm) of the order of changes for the 1740 degree ⇒2500 pulley (in the axial 径適 case) set.
On 2015-08-05 19:16:55
Those which were exchanged in failure, it has successfully operating for the same standard product.
Because it is manufacturers, and peace of mind.