The reviews are automatic translation.
Mirror mounting of the motorcycle Because the right side is a reverse screw
On 2018-03-27 16:21:12
I was able to install smoothly without trouble. It was a very useful part. It was saved.
I used it for the mirror change of a motorbike.
On 2017-04-05 20:17:34
Also Maruza is attached, painting is also solid, I think that it is a good product.
Radical mirror installation
On 2016-07-10 23:17:24
On 2016-04-30 16:25:18
It is very convenient.
As a spacer
On 2015-05-02 16:32:06
Dedicated Bike Used to fix the window using the screw of the mirror portion when installing the draft shield window to Yamaha JOG. Examining the screw on the left side turned out to be a positive screw with a diameter of 8 mm. When I tried it, JOG is turning right on the right side. Examine all right, left, and note it! However, is it necessary to turn the screw to the right? Is it? The bike side and the mirror side are (opposite), but both are reversed. Since one of the adapters is reversed, we decided to use two adapters with a combination of "inverse" and "positive / negative". As a spacer it was 2 cm x 2 and the total height was 4 cm. The goods themselves, neither good nor bad. It is only a matter whether it functions properly or not.
It is used for mounting the mirror of the motorcycle
On 2014-11-28 08:14:56
Although it can not be helped increasing the length of two nuts, I think that it would be better if you could shorten the length if possible.
On 2014-08-20 17:29:24
Because it is a set of two, I did not need a spacer.
On 2014-07-29 18:26:02
It is a very nice feeling.
Normally used for 125 cc scooters.
On 2012-12-17 22:10:19
Um, because it is a product of the manufacturer of Napoleon Miller, it can not be bad. Good balance between quality and price