The reviews are automatic translation.
420 Chain cut
On 2015-03-20 22:56:46
Although it was evaluation of the other person, if you understand and understand that it is not structured to understand how to use and pull out all the pins, there is nothing to break. It can be used without problems. The size is compact, it does not get in the way, I am satisfied.
Chain cut of motorcycle
On 2013-12-17 21:18:23
I'm commenting that you can not cut everyone, but you can chain cut normally. Because it is OK only if you pull out the pin of the chain by the number of the front plate. However, the strength of the pin extraction bolt has only 10 units.
Chain cut of the motorcycle.
On 2013-09-20 04:51:33
Even if I had not done much of the maintenance of the motorcycle etc, even if I worked the instructions as I did it was easy to cut the chain.
Scrap of 420 size chain.
On 2013-05-02 23:15:39
It will function at the level where frame dropping is done with DIY. However, care should be taken to fix the main body with vice, always check the extrusion point. I think that if you can improve it, I think that if you have a length and rigidity that will allow you to push out the pin completely, the user will be better. In fact, I could not push it out completely when I removed the frame, I self-made an auxiliary tool and pushed it off.
When cutting the chain
On 2012-05-28 15:22:42
The part of the bolt was threaded on the way of pulling out the pin with the new second chain. There is a problem with strength. It will not be used.
420 Cut the chain
On 2012-05-13 17:08:28
It is not usable. 420 I could not cut the chain. The extrusion pin is too short to pull out the chain pin until the end. By the way, I used the EK 420SR chain. Is it trialing with manufacturers and commercializing it?
Turnip chain exchange
On 2012-05-12 23:26:25
I bought it for turnip chain exchange. Bolts for extruding the pins of the chain were short as expected in previous product reviews, and we could not push out the pins completely. I do not think it is a famous Mukawa product of 4 mini. I expect improvement.
Chain cut of Super Cub 110
On 2011-11-03 11:09:15
Purchased to reduce the number of frames of chain 420D by two. Unfortunately it was not possible. The stick was short and I could not push the pin completely. I think whether it is difficult unless it is a chain thinner than 420.