The reviews are automatic translation.
The bearing of truck tires, was used.
On 2017-01-06 20:06:53
It is an easy-to-use products at a low cost. Size there is also a large number were very pleased.
Repair parts of the power tool
On 2016-11-24 23:07:00
Power tools, wear of the bearing is violently, you have to replace the bearings every time of maintenance. Because the cheaper price can be replaced with a new one to take the plunge without skimp. Problem is not.
On 2016-11-10 19:23:54
Variation is always stable without. Peace of mind to you can use.
Maintenance parts for the original Mind CNC milling machine
On 2016-02-09 07:04:52
For the replacement of the bearings that are used in the spindle unit, was purchased as a spare.
Manufacturer is different, but should work without problems because the standard is the same.
(Tolerance accuracy is not a problem if the Japanese-made bearings manufacturer the same. If Osaka soul of accuracy is poor will be junk.)
It is recommended the product to those who frequently used the CNC milling machine.
The more there is a high rotation, because the bearing balls will wear, will cause or could not shake occurs clean processing of the rotating shaft, a large hole of more provisions or open-distorted hole would open.
If you think working accuracy kana fell, it is better that you exchange as soon as possible.
When removing the bearing in the bearing replacement is recommended that you use a bearing puller.
(I have made a dedicated puller at a low cost, because it does not use only original Mind CNC milling machine and out, you might be better of commercially available.)
On 2015-11-04 06:39:49
I purchased the 6904ZZ, but had been 61,904 and embossed on the body.
Although we received the inquiry was at a "manufacturer own described" description
Next time buy do not know.
Assembly and repair parts of the machine.
On 2015-04-23 21:26:50
Until now, we had been using the domestic bearings, tried instead to take the plunge. Or China? Or Hata also Korean? I do not know well, the size of the basic is no problem. With regard to the specifications, there is no inspection equipment, but do not know well, It does not have any bad feeling, you can use without any problems. When the Bank of Japan is working hard to built the inflation target, there is no excuse, but, price is one-third. But it is not recommended, there is no problem.
Repairs to the machine
On 2015-02-06 14:24:19
Durability is yet to come, but a feeling of use is no problem, the price attractive. However, depending on the operating temperature and environment are also believed to use a competitor's product.
Used to exchange parts of auto parts
On 2014-08-11 11:39:21
Using five years I think that can be seen with. Now is now air conditioning can be used thanks.
Hobby of bike
On 2014-06-10 19:24:20
Anyway cheap. Quality is also no problem.
Repair of children's toys
On 2014-05-14 09:40:13
Running state is also well soooo