The reviews are automatic translation.
I used to paint the bike-helmet
On 2017-03-19 08:51:29
Still, it does not use, was to show the goods to fellow, we received your ink stems with that good products, so get on with within one week, it thrilled.
On 2017-03-06 15:06:12
Since just entered the merchants of the world repair, I do not know that of other products, it should be used because the goods that have been specified by the company.
Paint small items
On 2016-02-26 10:42:56
Spray gun is little of this size, this price is cheap in with a cup. If there is an opportunity, also Buy.
Painting of Motorcycle Parts
On 2014-11-24 13:15:51
Buy things of the nozzle diameter 0.8mm. Although those who focused a little needle to blow a low viscosity paint was a good result, many spray dust of the peripheral portion (some will be improved in the pattern adjustment). Sahu also advantages to indulge easier if moderately adjust the viscosity. Although it was 0.8mm selection of which was conscious of Sahu, considering that you purchase the nozzle of 0.5mm from the results used in the parts.
- The lid of the cup is not Simara to Kichitsu and root, difficult to use in going out to the beat of something. I think it other than a good gun. As of us, it is oriented to blow the complex small parts of a small area or shape.
On 2014-11-14 13:40:05
Sufficient as the performance of the cancer. I think good to split the price. This 0.8mm is Sahu also sufficiently indulge. Either with said low viscosity paint is not good if (easy to get a rough of the peripheral portion), but can be covered depending on the selection of the adjustment / thinner arms and paint of people waving. Also easy to wash.
Problem: the lid of the paint cup is not close to the slightly larger completely against the cup. For the time it is difficult to use Sashitsukaenai for use. In particular, and I would put a little time leave the paint to the gun, Hazama of the paint cup and the lid is then dried and expects the lid can not be taken. Also, dont likely will be taken in the middle of painting or lid tilts remains was placed lightly in anticipation of it.
It took up to it if it said that the specification of the echo, but you feel like inferior compared to the competitor's product. In spite of the actual sales price is a pity for the other is good.
On 2014-07-24 23:13:47
In the past, had been using the old type of MegumiHiroshi a minimum range, depends on the site of the specification environment, but difficult to handle of tip, difficult to reproduce a beautiful pattern, much use is outside panel painting since the narrow width and it did not. The coating film is thick skin had been stored and is not suitable for slimy to become those of a urethane 2k like the old days. Recently, the paint also higher dilution rate in the aqueous, and various out those pattern width is larger in small diameter. It is not essential to give the skin in recent years of mini-cars has been also selected in the top coat the w50 Iwata. This time, was purchased in order to try to use between w50 and LPH50. The shape of the tip is not much different from the old days, but it matched the pattern width is also satisfied with the now of paint. This is a very dominating likely. This is a very happy if you can use about three years.
Coating of the headlight
On 2014-06-25 14:44:32
I think that it is equivalent to the spray gun of the well-known manufacturers
Dyed painted leather
On 2014-03-25 18:05:10
Satisfaction can fine spray.
To begin with useless
On 2013-09-07 23:55:04
Since the goods arrived, it was a operation check of each part. It was fitted with a lid of the cup, but the attachment was but the last, does not come off no matter what you're doing. The first place can not be used, there is no way of knowing, such as the performance of the commodity. At least cup design mistake. In any case, it is the lowest of the product.
RC airplane paint
On 2011-12-18 18:37:07
The amount of paint cup is slightly less, but I think trying to buy the 250cc of the cup, to the Product List of Monotaro,
Is regrettable 250CC cup is not riding as an option.
For the inner surface of the cup: I have also used the gun of another person, the same because the rough treatment of the inner surface than the internal cleaning of the cup
Spear difficult, even paint remains forever. That's color paint, remaining easy confirmation, but be aware that that could not in the odd cleaning not notice that it is clear.