Because the side back of the motorcycle melted by the heat of the muffler, it protected with this seat. The product was felt-like fabric and the adhesive tape was solid and it was able to stick it beautifully.
Many motorcycle covers touched the exhaust pipe and engine, wrinkles and melted holes opened, there was also a cause that was torn out from there and it was also a factor that I badly purchased with a new motorcycle cover. Immediately, put the cover on the motorcycle to put it on the inside of the motorcycle cover, temporarily fasten (with cellophane tape) this heat shielding sheet together while placing the cover and getting into touch with the exhaust pipe, engine, remove the cover from the motorcycle I stuck it not to wrinkle at the place. Adhesive tape on the back of the thermal insulation sheet is also strong without stripping it even after folding the cover appropriately after sticking. And protecting the motorcycle cover against heat is also a singing phrase, and no trace was left as if there was nothing as there was no thing even if the cover got stuck with the wind. With this performance it seems that even a thin cheap cover can be used for a long time, cost performance will be good. Heat shield sheet itself, this size has a slightly high sense of making it nearly, if it is a little bigger, it can be stuck with rough positioning, the protection area has also expanded and I feel that it is affordable ~ It was.