The reviews are automatic translation.
Finishing around buildings and walls
On 2017-08-03 16:59:18
Because the body is small and light, it is easy to move in a narrow place. Because the structure is simple, you can easily adjust the length of the nylon cord, if you like, long or short. It is troublesome to cut and install one by one even when using two entrainment entries, it becomes more convenient if you use one end and use both ends by involving one.
On 2017-07-29 12:59:53
Although it is not automatic payout type, in the case of soft grass such as lawn mowing, consumption of nylon strings is not frequent, it is not troublesome to adjust manually. There is no place to break anything more than anything, so you can use it with confidence. It is saved that there is no need to leave the site due to breakdown etc. if only consumables are prepared.
Used for row cutting
On 2017-07-17 16:06:30
Being able to harvest the thicker grass than I thought is very satisfied.
Ishigaki and grass cutting on the roadside
On 2017-07-14 15:29:22
I think installation is easy and will not get lost. However, we could not find a washer written as (attached to this product) in the part explanation (Fig. 1) of the installation guide. The washer seems to be an important part, and attention is paid so as not to use other than "this genuine washer". In the case of I, it may be lost when removing the product from a stapler-stapled package on a plastic case, but should important parts be conspicuous, and should not be devised packaging that is difficult to lose. While I have several ways of using it, I tried Toshiba only with 2 crawls involved. Speaking about this, resetting the code was necessary because the code entangled with the stem, reset itself is not difficult. There were no other problems and the usability was good. It is simpler to build than a knockout method, etc. It seems that the material is aluminum die cast and strength as well. Because it is also inexpensive, it was a four star rating.
I mainly use it for grass cutting that grew on the stairs of Ishigaki.
On 2016-07-17 22:44:40
The cutter I had been using was a flat surface differently from the knife round because the circumference was careful, even if you were cutting it the cord was cut off instantly when you touched the stone wall Even if you hit the stone wall because of the groove I can not cut it It is quite easy to cut grass easily. All the cutters so far are dead and I feel completely out of use. We are also looking for somewhere that adopts a slotted cutter that protects the cord even with a fully automatic nylon cord cutter.
I am using it in places where there are many legal aspects and roots of trees and amateurs can not mow with grass cutting blades.
On 2016-05-02 18:24:55
Because it is metal-filled, durability is also good, it is also recommended for landscaping professionals because it can use 2, 4, cut cord code of several meters. Improvement points ... Some people want to strengthen friction against friction because some people use it by rubbing them on the ground. If friction is strengthened and this price was, I would like to attach ☆ 5 without complaint.
Aza of the field, mowing of the field
On 2015-08-07 11:57:27
Our mowing machine is made by Maruyama Manufacturing Co. (purchase of comer). We added a washer and fixed it to the walt. Fortunately there was a suitable size in the tool box. I tried various spools, such as automatic payout type and hitting type. It is also Mendou who reads instructions after being over 80 years old. This product is relatively inexpensive, and operation is super easy, just putting it in the next hole. When I used it for 3 years it got worn and I bought it again. Casting casting? Is it difficult to heavy Tito?
On 2013-11-19 16:17:41
I had a plastic product, but it melted with the heat of rotation. If so, it will be strong against heat as it is aluminum die casting. It can be mounted on a general brush cutter.
Used for general weeding
On 2013-09-05 19:56:47
There are weights, it is strong, easy to use, and there is a small hole to stop the nylon cord, so it is convenient to solve.
On 2013-07-12 12:03:53
My brushcutter is "Maruyama Seisakusho KC 26 B powerful type, purchased 11/06/06, it works well," the dimensions do not match, it is impossible to install. Dimensional description is inadequate. I hope for improvement in the future. The brushcutter is replacing every three years. You can use a model suitable for this cutter, do not return it.