The reviews are automatic translation.
Screw useless broken at one time securing the shaft during plywood processing.
On 2016-07-20 18:08:55
Does not work, you do not buy again.
Control panel (12 mm thick) opening
On 2015-05-25 19:32:15
Before the teeth got stuck, the mandrel became useless. I think that the price is still cheaper product. Is it good for those who use it only for thinner veneers?
12 mm plywood drilling
On 2014-06-16 13:26:03
When pulling the bearings with the pilot puller, since the part to hang the feet of the puller is not narrow, we purchase plywood to put the legs in order to create the jig. Since purchasing multiple sizes of teeth, you can use a lot with purchasing. Compact tool storage is also available. Sharpness is a place that corresponds to price.
This time I used it for connecting the vertical bar and the horizontal bar when creating the garden fence.
On 2013-06-10 21:02:23
It was surprisingly smooth, and the hole of the necessary size was beautifully empty with the goods which was firmer than it looks, I was very satisfied. Moreover, it is very impressed with very cheap hands.
Drilling for mounting the light to the door
On 2013-02-08 10:38:56
Imagine a general hole saw a bit surprising. It is simple enough to round a rectangular blade and hook it on a blue pedestal. Teeth are only about 330 degrees. Since there is only a hook on the blade, the core does not come out in principle, so even with a 24 mm blade with the smallest diameter it will surely break about 1 mm in diameter and 2 mm in diameter. Basically if you use it once with Sunday DIY, it is good enough, so it is reasonable. If you want to use it many times, you'd better buy a proper one. I do not understand it in the photograph, but anyway simple.
On 2012-06-01 22:53:50
This price is recommended for products with multiple size drilling. Sharpness is also good and finished very beautifully. However, because there is some shake, it may be unsuitable for those seeking accuracy within ± 1 mm.
To wood, pla and so on up to 15 millimeters
On 2011-07-05 13:40:18
There is no problem in sharpness at punching of plywood. It is surprising that there is no shake of the core at this price. Sometimes enough to use it occasionally.