There are many models that can not be mounted on the full cover, but the half cover is easy to install with any manufacturer's vehicle, removable only with rubber bands, can be used immediately when running on a wet road, You can reduce the dirt of your clothes.
I was able to install mine as it was easy if fitted to the bicycle. It is advantageous that it is light. If you repeat the desorption, do not cut the rubber band, temporarily stop it is okay. The installation length can be adjusted depending on the contrivance. Adjustable by slightly inflating if it is long. Mud is naturally less perfect than full fender, but it is not perfect. If you want to eliminate mud splashes, we recommend full fender.
1. 2. Missing parts (M6 washer: in the parts list, M5 bolt, nut, washer: not on the parts list, required for mounting of the rear fender) 2. Stay is about 35 mm too long, hard with stainless steel and difficult to cut . It is almost impossible to cut with a gold saw. Disk grinder cutter or strong wire cutter is necessary. For 700C it is not necessary to lengthen the adjustment fee. I want you to make it the proper size. 3.700C tires are mainly used for road bikes and cross bikes, but brake is mainly caliper brake or V brake. In the caliper brake fender hits. The front fender hit the V brake as well. Only the minority Kanti brake is not hit. "It is impossible to install depending on bicycle" and it is illegal to display it as for escape expressions and for 700C. Because it is a non-refundable product, you should note details of when you can not install it.