The reviews are automatic translation.
On 2015-12-10 21:43:12
It was attached to the city riding MTB. This mounting of the Slick of the same time. Mounting bar accessory is required cut to the appropriate length because it is long. Also rear Let mounted tightly measured the length of the left and right because there is a hub. Mounting flies Ppoku cross bike, finished in a more city riding for. I think that cool by yourself. I expect to be long-lasting.
Rainy measures of bicycle commuting (cobblestone Black Eagle Rigid MTB)
On 2014-12-18 15:10:32
Since the general-purpose fender, is a stay of the cut is required in accordance with the respective bicycle.
In addition, since the supplied bolts in some cases mounting it is difficult, be harsh to those who work is not good ....
Bicycle to the contrary, for those who love DIY you can enjoy half-day position!
Change from the MTB for mudguard
On 2014-06-18 12:04:45
Maiparasu M-650type2 but has been changed from the mudguard of accessories, also matches the design, the intensity is also no complaint.
It enables travel without having to worry about the rainy weather during the dirt, and we are very pleased with.
By the way the stay was cut about 3.5mm.
Lightweight, the entire body weight was also requires an increase of about 250g. C / P ratio is It is preeminent.
Mountain bike installation
On 2014-05-25 19:09:46
It was necessary to adjust the length of the attachment stay and the rear wheel side was shortened by about 5 mm but it was barely fixable. This size is impossible to cut with ordinary pliers like home home need a pipe cutter. Also, a part of the seat stay fixing device (made of plastic) on the rear wheel hit the stay, and several washers had to be put in. Since the front wheel side interferes with the basket fixing metal fittings, the front was cut off from the fixing metal fittings. (If you do not have a front basket you can install without problems)
On 2013-08-01 17:50:12
Since the length of the attached stay is a little long, it can be cut according to each bicycle and can be installed and a little length can be adjusted with parts of pop off function and is convenient. I used a resin fender made in China before, but the back fender was often jumped up and it was damaged. This product has measures to jump up.
Mounting on a bicycle
On 2013-04-17 13:53:39
It is a bit wide, but managed somehow. I did not think that it could be installed as it was, so there was no problem with the processing of the stay. However, it is too long for 26 inch stays. Does that bicycle need such a long time? I wonder if it is a fixed size material.
Mountain bike mudguard installation
On 2012-05-16 21:24:31
There is also a bicycle with no screw mounting holes on the axle of the bicycle but it was possible to install as I had it. The screw mounting hole was too small for the attached screw and was separately purchased (M6?). As mentioned in other reviews, the fixing rod was too long, it was necessary to cut the stainless steel rod of φ 2 mm to about 35 mm. For sawing saw blade and stainless steel cutting saw is necessary. I managed to finish with a hundreds gold sauc. Since burr comes out, a metal file is also necessary. Biking is fun by experiencing various things.
Mudguard for MTB
On 2012-03-25 01:33:28
Dimension suitable for 26 inch with V type stay length attached to POP OFF (fender mounting bracket) from hub axle (center of wheel). V type stay installation uses dowel hole, but the difference between the position of the hub axle and the dowel hole does not make the tire and fender concentric circle. I think that it is necessary to cut the V type stay depending on the position of the dowel hole. Since it is a full fender, it is satisfactory as a countermeasure against the rear wheel splash.
On 2012-02-11 18:27:08
It is necessary to cut thick stainless steel at the time of installation and it is easy to install if it can be cleared. The feeling attached is also pretty good.
On 2011-09-19 11:12:06
Do you use the V type stay of PC full fender for MTB by cutting? Since the size is not matched at all, the stay side floats and the other side interferes with the tire when it is attached. Described perfectly for 26 inch MTB?