It is a repeater. Last time, I tried installing it so I was in good condition. In the review of the other person it was said that the screws for maintenance were hard and not opened, but put the strainer in the vise (small, cheap things you bought at the home center), set the eyewear wrench to the nut and hit the end of the wrench with the hammer It was easy to get out. I bought 6 pieces, and 6 pieces both went out without problems.
I have not used it for a while So water softener installed in open water pipe For filter protection
On 2015-06-28 06:37:07
I installed a 10K bronze Y type strainer for water confirmation, I tried to pour water from a strainer into a bucket · · · It was confirmed that 2 millimeters of red water and solid was confirmed so 10K bronze strainer strainer strainer check rust Make sure the chunks are confirmed Tribe is gotten · · · · ·? Removed and it was dumbfounded with a small amount of 2 milliseconds? First place in 1/20 of the amount that came out There are gaps in there. If the removal hole of the strainer faces downwards and the piping of the water softener installation filter faces upward, it will become the rust removal hole position.If the position of the removal hole of the strainer is not raised, the bucket etc will not enter ... · · · It is not badly appearance Others are normal, strainers are light resistance.