The reviews are automatic translation.
Bicycle speed change
On 2017-12-31 17:10:28
The attached wire was defective and the gear shifting was not good, we purchased it separately at the home center.
Purchased for replacement as it has been damaged
On 2017-05-31 20:23:32
There is no problem as it is combined with those attached as BS standard parts. Although it was written that the wire is connected by oneself in the instruction manual, it was connected from the beginning and it was saved the trouble of disassembling the shifter main body.
To replace the old type transmission
On 2017-05-16 23:29:47
I was satisfied. It is easy to use and can be used without problems
On 2017-03-15 22:25:35
It is cheap and good!
Maintenance of a folding bike
On 2017-02-16 18:09:15
There is a possibility that the gear of the old interior 3-speed transmission shifts arbitrarily, and I tried to replace it if it might be a trouble of the shifter. It was unknown what kind of effect existed because I made speed change adjustment with exchange, but it seems to have been improved more than before (lol)! Shifter has been used for many years with wounds as well as a brand-new appearance, but it also looks better, but it is the same as before as there is no lighter operability with shifter replacement. Since small accessories around the transmission can also be considered as causes of malfunctioning, it is under consideration to exchange small accessories in the future.
For replacing mummy calli
On 2017-01-31 21:32:45
It is good if you can choose the length of the wire There is only a little longer thing, I have purchased and exchanged this product by any means Wires are a little extra
As a bicycle transmission gear wire
On 2016-11-14 16:13:44
Since the bicycle toppled over and the grip part was broken, there were similar products so it was installed without purchase problems. I am doing well now.
On 2016-10-09 22:52:29
I am very satisfied. Since the installation gear change became very smooth, running on a road with a slope became easier than before. However, in order to install this, I did not know that I had to remove the handle grip, I was worried about what to do with the grip just replaced a few days ago, but I learned the bicycle shop and knocked out the brand new grip I could exchange the grip shifter.
On 2016-09-29 22:56:14
Products fitted are bought and exchanged because of many troubles.
Maintenance of private cars
On 2016-03-17 14:45:58
We used it for the city cycle of the interior three-stage gear of our house which we are using for nearly 10 years. With repeated falls during use, cracks occurred in the grip shift part at hand, and additionally, from the change of the change wire, even if the adjuster was adjusted, shift change became impossible. So I used this product and tried to improve it. Of course, although the installation itself is easy, it is difficult to do without properly using proper tools. I am using a tool for motorcycle maintenance. Cheap tools not only reduce work efficiency, but also experience parts breakage due to accuracy problems. In the instruction manual, I removed the cover of the shifter and installed the wire ... but it was organized from the beginning. After that the adjustment of the push rod for the shift of the hub was slightly worn out, but we assembled with the wire length shortened until the full length because the wire length was a little long. With this, I was able to shift well with three speed condition. Is it possible to adjust the elongation of the wire even on the grip side? Either way, it is Shimao Shimano. I was able to do a good shopping.