The reviews are automatic translation.
Order for replacement with hub dynamo
On 2017-07-19 16:54:22
Since the beautiful nipple is also attached, the finish is wonderful.
Replacement of bicycle spokes
On 2017-07-17 22:53:45
I bought it as a replacement spoke for the front wheels. For use with rear wheels (# 12-292) also available.
On 2017-05-23 19:29:03
Spoke attached to the rear wheel. I bought a spoke of the front wheel due to a wrong number. Non-returnable? Mai, you mean?
I use it for the handwheel.
On 2017-04-05 18:51:56
I used DT, Sapim but I missed the star. It is attractive in terms of price. I would like you to handle not only 13, 14 but 15 G. Also I would like you to handle aluminum nipples separately.
Creation of hand wheel
On 2016-11-27 11:44:08
The product is a truly unmistakable quality. I will not say until the left and right spoke lengths of the rear wheels ... and so on, considering using different lengths on the front and rear wheels, it is appreciated if there is a lineup of 36 sets. Also, it is even more pleasant if you can handle 15th.
On 2016-10-19 23:50:55
I would like you to deal with No. 15, butted, aero as well. I am satisfied with the product.
Bicycle wheel assembly
On 2016-09-30 13:23:59
We are very grateful for this product lineup. However, if it is an exchange degree of a spoke break, it would be better to buy it at a net shop selling from several, and if it is neither a bicycle store nor a professional, the opportunity to use 72 sets will be relatively rare. I installed at least spoke, but there is no problem at all. By the way, numbers 13 and 14 are compatible with the same nipple / hub flange hole. Below is a snake foot to those who buy spokes. Up to now, bicycle wheel assembly was thought like a professional, leisurely stroll ,,, but when trying to make the rear wheel of an old bicycle (GRANDTECH, 7th speed) for commuting to a wheelless for a tubeless tire, It seems that the width of the hub (135 mm) does not match the frame (for 126 mm) (TL wheel can accommodate more than 10 speed correspondence only), but it is certain that tubeless is harder to puncture (about one third of clincher) , An assembly challenge was urged. However, in order to know the length of the correct spoke, there is only one of the lower side, even if I look at the manual of the bicycle, I do not write the standard of the parts necessary for such maintenance (at most the size of the tire) That important value is not made public on the site of. From the manufacturer, the intention of selling that I would like to have the new products consumed more efficiently than carefully using the old products carefully for a long time is penetrating, but I am confused) Because there is expenses, if it was the first person, I think that it is also handy to buy a few standards and buy the most fitting place where you can buy it in a small number. ● Measure the current spokes with a special ruler (I do not know with just a ruler, I tried doing it when the spoke broke for the first time but it was totally out of the way) or ● Parts to be used , Rim and hub) manufacturer and product number, search the necessary dimensions and enter it on the automatic calculation site and calculate it. Even SHIMANO made hubs in my case, the size proved by virtue of the English site somehow.
Exchange of broken spokes of rear wheels
On 2016-08-18 01:41:31
Implementation of bicycle repair by an amateur. Experience of replacement of interior gear shift gear and replacement of rear wheel roller rake. A number of spokes broke and replaced. I was careful about the length with the dimensions of the replacement spokes, but I do not know that the diameters are different between the front wheels and the rear wheels, and for the rear wheels it breaks unless you use the appropriate thick one. Considering that the direction of rotation to be tightened every other by nipple turning is opposite, it is necessary to adjust the wheel so that it rotates and becomes the center. Roller brake is in the way of installation, but even if you do not remove the wheel, you can replace it if you do a little "ingenuity".
On 2016-08-02 18:59:12
I am thankful that the star spokes can be easily obtained and the size is abundant.
Exchange broken spoke
On 2016-05-25 12:51:19
The length is slightly short. . . I intended to measure it carefully with a ruler, but I was still sweet. I think that if there is sale in a smaller number for repair, since Monotalau is not a bicycle shop (so we do not consume it so we do not consume the stock, so we do not have the inventory) We are expecting so far, probably covering all the standards I think that it is wonderful.