The reviews are automatic translation.
On 2017-05-19 14:49:38
The neck portion could not be assembled as long as 4CM, it was cut with gold saw and attached. I also wanted to write the length.
To replace the bent fork bumped.
On 2017-02-03 17:03:10
I think that it depends on the form of the bicycle, but I was able to exchange it more easily than I expected in my mama Chari.
Exchange broken mamariari folk
On 2016-08-15 16:37:15
I purchased CP. CP's texture is high, so I am satisfied. Prior to fork replacement, the thread stem of the old fork did not come out due to electrolytic corrosion, and the head part was deformed by this work. I could not wait for the time to purchase Tange's JIS head parts, but used another manufacturer's head parts. I brought it to a bicycle shop and removed the lower ball press with a special tool. The washer of the lower spherical push was large, and a new lower ball push was not entered. I got a washer to wash away with a special tool and it was able to be exchanged. Try changing it, the lower sphere push just holds the hanger retainer and does not roll the ball bearing. Then, I thought that pressing down the bottom ball could be diverted to the head parts of other manufacturers (That is why it comes from the beginning). It may not have been necessary to bother to remove the bottom ball push. I thought that it would be possible if you were going to divert the bottom spherical push that was assembled from the beginning. I thought that it would be difficult for individuals to exchange the lower ball press.
On 2015-09-29 17:15:39
Purchased 26 inch CP items. The bottom ball push is attached from the beginning, but I think that it can not be removed. Even if you want to use the lower ball push attached to the headset due to the shield of the headset, the bottom push pressed from the beginning is welded and can not come off. Also, CP plating is applied after welding, and turning the handle when tentatively organized for the first time was gorigori. I pulled down all the CP plating pushing the lower ball, and finally the handle turned smoothly.
Old bicycle regeneration
On 2015-01-04 20:24:57
In the review "There are only two welding points of the bracket from the outside", so I was slightly worried that "Would you weld and paint again?", I wonder whether there are individual differences, this time it arrived The fork (silver) is very satisfied because the light bracket outer side is firmly welded from the top to the bottom.
On 2014-10-05 23:14:29
When I purchased it last time I was satisfied with both price and quality, but this time the light bracket is turning inward on arrival (it may be a delivery trader), but I applied a slight force to fix it, easy I gave it to you. I think that our pressurization site was not good, but the welding point of the bracket is only 2 points from the outside, the inside is not welded at all. Last time the same item was firmly welded ...
On 2014-09-27 16:47:00
Replacement of parts that were overturned and deformed. Especially assembled without problem.
J Repair of accident vehicle
On 2013-07-08 13:52:13
The strength of the product, the finish is no problem. The price was reasonable and saved. Although the color is silver, is it a place like priming before painting ...
On 2012-11-16 23:58:16
Previously, I felt dissatisfied with the significant price rise. The merit is small at this price. I changed price satisfaction level.
Modification of mummy calli
On 2012-09-23 17:41:57
Processing of Cr plating is also good, and the fork of that Tanger is satisfied satisfactorily at this price. It seems that the material is high tensile steel, but the ride comfort is not bad. It is a little troublesome at the time of making a remodeled maamari because the lower ball receiver has already been installed. For the maintenance of plating we are using Unicon car cream and Million industrial instantaneous Sabbiti bicycle. Million industrial moment Sabbitri hope handling for bicycle.