On 2016-03-29 19:03:30
Threaded parts, wanted after 1cm ~ 1.5cm. I think that is useless can not be stopped. Also asked a threaded to bicycle shop, since taken quite a amount of money.
On 2014-09-29 22:23:53
Moderate to bending, you see the vibration absorption. Weight is not aimed, I think that light in spite of steel fork. It might be because this manufacturer. Mom bicycle fork, has been revised. Finish, quality Good! Is. It will continue selling please.
I replaced MIYATA 's bicycle front fork.
On 2012-01-26 04:10:38
I could not understand the meaning with the bracket, but how did it come with a bottom ball push. I bent the front fork of Miyata's bicycle, and at a bicycle shop, it was said that "parts 5 thousand yen, labor charge 2 thousand yen" was bought. S center in the home center is said to have similar fee and working days one month, decided to do it yourself. Removing the bottom ball press and inserting tool sequentially, I made it sequentially, but since this product has its bottom ball push attached, I did not have to do the troublesome task of removing the bottom push from the old fork and replacing it I'm sorry. It is a pleasant positive surprise. I never thought that I could change the front fork so easily. For reference, my bicycle was with Miyata's "W - one lock", so I chose this "chief". As a result of measurement, it was 195 mm in stem length, so it is 5 mm shorter, but it may have been good with another 190 mm product which is not a chief. For this time, I cut it by about 25 mm and used it. Also, since the width of the keyway cut in the screw part of the stem is 2.9 mm, it is OK if it is a general bicycle, so it was slightly thicker, 3.1 mm because of "W - one lock", so sandpaper I cut it a few times. I could install without problems. By the way, although it is not written in the specification of the site, the thickness of the stem (= tube) is the size of a general commercial car with 25.4 mm. Thank you for a good product.