The reviews are automatic translation.
Used as a check power supply for LED parts for cars
On 2018-06-04 16:12:57
With 2 AA batteries enough voltage can be obtained for LED checking.
It is difficult to use the insertion port of the lead wire. I'm gone.
For lighting test
On 2018-05-18 15:05:12
To check on arrival of LED / LED backlight for automobiles / motorcycles at arrival. Although there is no problem in use, it is difficult to connect the external wiring to the one-touch lock terminal.
As a switch for 12V electromagnet
On 2018-03-27 21:45:13
I was surprised because I was really looking for a 12 V battery box.
LED lighting test (color confirmation etc.)
On 2018-01-04 19:21:58
· Handy LEDs for 12V can be handled with 2 batteries so it will be handy.
· It is convenient where you can remotely switch on and off.
· Because it is small size, it is easy to position and store in the car.
The contact of the coupler terminal was bad.
On 2017-07-04 19:44:18
The coupler terminal of the accessory code was poor contact, I measured the tester but the voltage did not come.
However, wiring was able to be inserted directly, and voltage is applied there, so we are getting awkward.
Presentation, place without external power supply, decoration
On 2015-12-07 10:23:56
It is useful. With 12 AA batteries, 12 volt LED can be used and frequency of use such as decorating has expanded.
Car trunk lighting
On 2015-11-11 19:12:14
Use only the power supply box without using the supplied wiring. It combines with the optional LED lamp 70 mA.
Power supply for lighting used for product inspection
On 2015-11-04 17:44:13
I bought it as a lighting power supply for peeping in the product and checking it. T10 LED wedge sphere is flashing, but the durability of the switch is difficult. About 500 times ON / OFF are repeated on a day, but wedge spheres fail to light up in early ones in a few days. There seems to be no problem with the wedge ball, apparently causing contact failure with the switch. (It lighted normally when attaching an external switch.) Since it is a car accessory, I think that we do not assume the number of times of use like us, but since the battery BOX with a switch that can easily take out 12V is not likely to be present It is such a shame that it will be such a result.
For gyro canopy trunk light power supply
On 2015-05-29 15:02:48
In order to attach the trunk light to the gyroscope, it was troublesome to draw the power supply and used this product. It's a very easy-to-use product because it has enough light for a long time thanks to lighting the LED.
Used for lighting of classic bicycle headlights
On 2015-04-14 22:32:43
It is good!