I put it on my bicycle 27 inches properly, but it did not become parallel. The rear is quite high and it becomes a naname. Also, the black paint is thin enough that there is a portion where the paint was bald and rubbed with enclosed items at the time of opening, so you should not expect too much.
In the title of seat stoppin? Is it? Is it? Is it? Is it?
On 2016-12-05 09:15:42
Although I purchased to purchase a carrier (carrier) for Mamari Chary, I bought it for attaching to the seat, but the space (space) of the mounting part and the length of the seat mounting part do not match at all. Although the seat side is about 35 mm, the space of this carrier is 45 mm or more, a spacer of 5 mm or more (thick washer) is required for creation of a gap, and appearance is also ugly! The space of this career is a space for attaching directly to the frame attachment of a bicycle, not a seat. Thanks to that, it became useless shopping without being attached. I'd like you to describe the dimensions of the main part like the mounting part, since I will modify the title. Although it is saved by posting many parts, unnecessary shopping also occurs, so I think that the description of dimensions is important.
Previously used items became rusty and replaced. I have used it for 1 year, but big rust does not come out. I sometimes wipe it with oil and it does not rust. Is it because the coating quality is good? It is still beautifully usable.
Since the frame size was 405 mm, I bought "low floor" as a low floor or a high floor wondering. Installation work was easy, but the loading platform did not become horizontal. There seems to be a chance to improve by bending parts of the career. For those who want to level the loading platform without doing extra work, I would like to recommend another product though it is a bit expensive.
The more you understand that it is a good product just looking, the better the texture. In general it is clearly distinguishing from what is in the home center etc. It is thought that it is very worthwhile to purchase at this price
I installed it in the seat pin part of the city cycle, but if the pitch is close to 15 mm wide, if it is attached as it is, it will deflect by 15 mm and tighten the pin, so the gripping power of the seat will be insufficient. Because it is unsafe, we purchased 15 mm long bolt and 15 mm spacer separately at the home center and installed it. As for the M8 bolt sold at the home center, the screw pitch is 1.25 and the screw pitch of the bicycle seat clip is 1.00, so we discarded the seat clip and made the nut into an ordinary cap nut. It is not satisfactory because the convenience that we can do without raising and lowering the seat can be done even without tools. The carrier itself is strong.