The reviews are automatic translation.
Cracking occurred in black rubber tube for gasoline of household cultivator, gasoline leaked and it stopped moving. For that reason, we chose an oil resistant tube for repair and replacement.
On 2017-05-04 00:32:01
I chose the inner diameter and outer shape of the tube and thought it was more elastic, but it was harder than rubber and could not be inserted. I thought that I failed, but I scraped out the part with the outer diameter of 0.3 mm with filing. Where the inner diameter was narrow, it was spread with a soldering iron. As a result I was able to exchange well. As for the improvement point, hardness was not understood by catalog notation, so I wanted a precautionary note first. Also, it will be saved if you know the situation when you bent.
Replace the oil from the engine oil change inspection oil port
On 2017-04-22 02:26:35
Because the outer diameter of the possessed oil changer was 6.5 mm and only 0.5 mm thick, I could not change the oil and I thought about buying new things but I solved it with this tube. Just to be sure, I bought a thin tube, but I needed to purchase an outer diameter of 7 mm and an inner diameter of 6 mm because the gap allows the joint to have an outer diameter of 6 mm. It is necessary to pay attention to bending when using it due to the thickness, but it can be used satisfactorily.
As an oil changer of the hose of a motor vehicle
On 2017-03-17 18:27:59
Not enter and thicker the diameter of the accessory pipe of oil changer, was used to connect the item. There is a firm hardness, reach to the bottom of the oil pan, was saved.
Purchase to shift wire through the bicycle
On 2016-11-03 21:44:25
I received a thing that was decent. It is likely can buy with confidence.
Thank you very much.
Production of radio-controlled boat
On 2016-09-06 17:13:44
So far I use many times but has come in handy cheap.
Death There is a problem with the packing is no problem this time is in the product.
Was troubled have broken at the center. Stretched even broken has returned to warm in the burner and put a shaft into reluctantly without returning but was dimensionally useless. Eventually they were cheated by inserting from both sides off there separately.
It ruined the precious product.
Filament guide of 3D printer
On 2014-02-19 14:22:22
When I was looking for a PTFE tube I bought a PFA tube because it was cheap. Either of them is usable, but we are relieved because wear resistance is high (should be).
Filament delivery part of 3D printer
On 2013-07-15 13:40:09
It is important that there is no strength and elongation of the outer filament feeding part (non-warming part) of the 3D printer. It was usable because it has an outer diameter of 6 mm. I am saved. It will be insufficient in strength at 5mm. It is also necessary to cut off from the outside of the screw thread (actually by pushing in the nut and making it self tapping) No problem. Although it is 3 mm filament, it uses 4 mm of filament friction.
Extraction of engine oil of car
On 2013-06-24 15:10:55
I was able to find the size I was looking for for a long time, from among a variety of sizes. I also had a length of 1 m so I could feel free to try it. It will be appreciated if you can describe the physical properties in a bit more detail. (Heat resistant temperature etc)