Although the brightness was satisfied, the switch behind broke and fell into the inside. Although it is repaired and used, the switch is rotated in three stages of flash · bright · little dark, and it is troublesome because it has to be pressed many times when turning on / off repeatedly frequently, and it is troublesome It is often that you have used it with dark lit because you do not know which side it is when you switch on 2 steps. Although it explains when it gets flushed by lightly pushing the switch, it becomes flash once every three times, and it sometimes flashes with vibration etc. When using it for work, ON / OFF was better simply. The ring of the zoom was not stabilized by the skusca. If I thought that it was such a thing, the thing that got the same thing with the prize was a rubber ring, and since there was no rubber ring in the thing I bought, I noticed the defective item. Sometimes the ring stopping the lens at the tip is loose and quickly falling apart in the pocket. When the luminous flux was throttled all the way, since the shape of the LED comes out, I wanted it to stop before that.
When the tip part is a little smaller, it may not be uncomfortable when put in the pocket. Although it may be unavoidable mechanically, I will do my best again. It is convenient to see parts spot when converging.
You can not do sliding style with zooming sky. Rotary type, I want some degree of hardness. Regardless of the zooming position, the illuminance is concentrated in the central part. If it is the narrowest angle, LED will appear.