* Products that meet your criteria are shown in
Purpose To loosen the fastening of the water shut off valve, flow control valve, non-return valve, To loosen the fastening of the water shut off valve, flow control valve, non-return valve
Tip Size (mm) 18
Blade Thickness (mm) 1.5
Shaft Length (mm) 100
Weight (g) About 120
Overall Length (mm) About 150
Customers Who Viewed This Item Also Viewed
TONE (Maeda Metal Industries)
7 Customer Reviews
The reviews are automatic translation.
Work around the water supply
On 2015-11-20 20:04:08
First of all, 150 mm in length, this size is exactly right. Easy to use. Go smoothly into the tool back. It does not have to be bulky.
On 2015-10-14 18:21:55
It is inexpensive and satisfied satisfactorily.
Used for stopping water washing
On 2015-02-04 15:16:45
It fits tightly into the groove, it is a good product.
Filter cleaning of mixing curran etc
On 2014-11-11 21:09:51
If you have a hole in the grip, I think you will not lick a hard minus if you can insert it with a screwdriver and hold it down while turning it down
On 2014-06-10 18:19:55
I used it with mixing stopper repair, but as you turn with the screwdriver to tighten the screw at the crank, both ends of the driver will be caught on the way. I would like to cut off the taper part of the minus screw a little.
On 2013-03-09 08:34:24
Easy to hold, the length is just right, it does not slip well with biting.
To a narrow minus screw
On 2012-07-13 13:14:51
Even if there is enough thickness, you can also adjust screws that can not be turned with a regular flathead screwdriver.
Customers Who Bought This Item Also Bought