The reviews are automatic translation.
Maintenance of the bicycle pedal
On 2017-01-31 15:34:47
First of all, you can not with anything this tool is not. Immediately, but was grease up to decompose the pedal, due to the use of pliers, it was put away slightly Namete Made of resin. Again, I think it is better that there is such as 36mm wrench.
On 2016-12-13 04:55:20
Direction to turn left and right pedal is reversed. Please turn in accordance with it because there is described in the tool. At the same is my failure, right pedal is reverse screw also all of the nut in the pedal shaft. Inadvertently cause by turning in a clockwise direction at the time of removal, it has licked a thread. Please be careful.
Maintenance of the pedal
On 2016-10-03 14:42:22
Because the material is soft, this tool is a pain when you Yurumeyo a firmly tightened screws using pliers.
Pedal of maintenance
On 2016-09-28 14:11:15
It might only 105 class following, pedal Shimano is irresponsible is bearing adjustment at the time of a new article, and bad or rattling around in and out is if it is used, it will immediately ruin. So, in order to adjust per decomposition ball at the time of pedal purchase, this tool is a necessity.
On 2016-05-27 14:44:34
New pedal Shimano has a strong sense of Gori, adjustment is required. Cap for adjustments have been strangled hard and, it is better to buy therefore certainly be able to break the cap and this tool is not. Cheaper.
On 2016-03-16 13:34:36
For Shimano pedal maintenance is essential, specialized products.
Necessities of Shimano pedal
On 2016-01-21 01:28:12
The Shimano pedal of the old model a necessity. Since the lock Bush has tightened quite firmly, always broken and turn other than the special tool. In addition, you will need to separately prepared because you will need the 36mm position of the wrench when using this tool. It recommends so turn to more new and make the bearing adjustment of the pedal using this tool.
SPD system pedal maintenance
On 2016-01-12 13:39:59
If this tool is not, I bought because the pedal is not roses.
Grease up pedal
On 2015-09-04 17:14:29
Depending on the type of pedal, there is a high possibility that the lock bolt will be damaged if it is tried to rotate it using pliers etc. to the object made of plastic. Disassembly is possible without damaging if you use this product. Specification of tightening torque is about 10 to 15 Nm, but the place to be caught is □ 36 mm shape, general socket of torque wrench can not be used, wrench of width of 36 face width or monkey wrench of opening dimension 36 mm or more is required . People who grease up pedals are encouraged to purchase.
On 2015-08-01 22:37:42
It was saved because we did not sell it elsewhere.