The reviews are automatic translation.
On 2017-07-15 09:15:28
During oil change, draining bolt spent dozens of times with reuse, there was never leaked, but reflecting, packing replaces drain bolt once every two exchanges every time. This product is price range executable range. I believe that quality is better than reuse.
In short, I think that it will not be "stupidly tightened" to the extent that it does not leak or become loose. The torque wrench is exaggerated, but ...,,
On 2017-04-07 05:18:38
Although normal use will not have any problem, sitting is bad, as the bottom surface on which the magnet is mounted is not flat. I used the original drain after all.
On 2017-02-28 18:57:12
There is nothing for medium old cars, so the quality is cheap so this one? There is no problem if it enters the smooths and there is no leakage.
On 2016-10-17 16:21:05
Genuine equivalent There is no problem. Cost is low and there is no problem.
100,000 km maintenance
On 2016-09-29 17:03:26
Worried about the rust of the replacement plating part at the oil change time
On 2016-05-17 14:45:23
I have not used it yet but I was looking for this to prevent aluminum oil pan damage. Finally found it.
During oil change
On 2016-01-15 21:32:53
Especially as genuine products
Oil drain cook
On 2015-11-19 10:06:43
On 2015-04-25 21:29:55
As a spare part when the hexagon was squeezed at the time of oil change, it was inexpensive and purchased. Although there seemed to be no problem with the screw part, there was a big scratch which was zacked in the hexagonal top part. Since it is the top surface, it does not affect the oil sealing function, and the oil drain can not be seen from the outside, but it seems that the losing item arrived externally.
SUZUKI EVERY DA62W OIL Drain plug
On 2014-08-29 00:19:46
Since the screw of Evry's oil pan drain plug has only a length of about 10 mm, if detaching for many years, the screw thread of the oil pan side collapses and it can not be tightened. (GH - DA 62 W type) Because the screw length is 22 mm, because the thread length is left on the back side of the current thing, it was possible to tighten it by hanging over it. If you are using a short screw length, it is better to switch to earlier than this one! I bought tap bolt (drain plug) at the same time and used it.