The reviews are automatic translation.
On 2016-06-26 09:21:53
I bought because the mirror was not attached to the bicycle was purchased.
It was a small visible range than I thought also seems is not narrow enough to be a problem.
Installation is tricky because you have wrapped around the handle bar to limp during the adjustment of the mirror.
I hope if there is a little more snap-sensitive.
Bicycle during operation
On 2016-04-17 21:47:59
Metal that most put in the beginning (trumpet shape) did not enter a few (about 1mm) larger bicycle handle end. It puts shaved a little to buy a metal file because it was lead. Was a component inspection no difference in product.
It was attached to a bicycle
On 2015-09-18 17:58:55
Well Well of feeling,
I'm glad if the catalog, such as can check the status of the attachment
Attached to a drop handle tip
On 2015-05-19 09:19:45
And moderate visibility, a good no-through blur.
Attachment to the bar ends can also be firm, fixed position is also no problem.
Although the degree of freedom of the first angle is felt less,
If moderately tightened, and no problem is easy to position correction at the time of or hit something.
The overall impression very well, and re-buy even break something.
On 2014-05-08 12:38:14
Since the curved surface of the mirror surface is small, the sense of distance is easy to grasp. Because the color was also in chrome, light of the oncoming vehicle and is me to reflection, safe to be? Since you purchased the inner diameter of the handle without scaled, but was somewhat processing, it was attached firmly. However, too much Kunyakunya moving parts. Angle is shifted just a little touched. I think that if you become a little more tight.
Bicycle rearview mirror of
On 2014-04-02 15:01:48
Convex surface condition of the mirror also looks just good well. Effectiveness of the screw of the mirror fixing is poor, is a little drawback is do I have tightened quite strongly.
On 2014-01-19 13:57:36
In the mirror surface is reasonable curvature, is the rear of the grasp is easy. In addition, since the mounting removal is simple, it is very good for us that is a combination of MTB and road bike to commute.
Use in MTB
On 2013-07-15 21:53:25
Attached to the MTB bar ends are used. The rear of the Ballmer also well very happy. It does not block the field of view because it is attached to the bar ends it is good and compact. Now we believe attempt to install in the road bike.